PDA

View Full Version : Question Reading TEMS 11.0.4 logfile with TEMS 9 or 10


yannick
2011-04-26, 05:28 PM
Hi all;
I've problem when trying to open logfiles made by TEMS 11.0.4(ori dongle+w995) with TEMS 9 (med...*).:L
Is there any solution to this issue (by converting logfile or med...* for TEMS 11.0.4 to use in another PC).
Thanks in advance for your help:D

http://www.finetopix.com/attachment.php?attachmentid=16027&stc=1&d=1303807145
plannerguy
2011-04-26, 05:59 PM
Hi

TEMS is not downward compatible i.e it cant open logfiles of higher version in lower for ex: TEMS10 log cannot be openend in TEMS 9

but is upward compatibble can read TEMS 9 log in TEMS 10


Regards
Plannerguy
yannick
2011-04-26, 07:11 PM
Hi

TEMS is not downward compatible i.e it cant open logfiles of higher version in lower for ex: TEMS10 log cannot be openend in TEMS 9

but is upward compatibble can read TEMS 9 log in TEMS 10


Regards
Plannerguy

Thx for your response;
So there is no solution ?
We must always have dongle pluged even we need only analysing logfile?
tpkj
2011-04-26, 08:21 PM
Thx for your response;
So there is no solution ?
We must always have dongle pluged even we need only analysing logfile?

You ca use the post-procesing tool as Actix for opening of TEMS logfiles.
MRO3
2011-05-05, 02:46 AM
i think for playing logs u dont need dong.le so use the latest version
Ummi
2011-05-05, 07:50 AM
Out of Topic, is it support for WIMAX?
royyanhadi
2011-05-05, 01:33 PM
why you not use ACTIX ANALYZER
....???
it's the best pre-processing data tool....
MRO3
2011-05-05, 02:49 PM
why you not use ACTIX ANALYZER
....???
it's the best pre-processing data tool....
because they should pay more!
yannick
2011-06-19, 10:30 PM
i think for playing logs u dont need dong.le so use the latest version

With TEMS 11, even for playing logfile you must plug in dongle.
mohyedeen_alkousy
2011-06-24, 06:28 AM
i think for playing logs u dont need dong.le so use the latest version

for TEMS 11 dongle is necessary even for analysis
itking
2011-08-11, 11:55 PM
Use any post-processing tool....................Actix will be the best choice
knack
2011-08-25, 05:05 AM
for TEMS 11 dongle is necessary even for analysis

If you have a TEMS network license, you don't need any dongle :D

From TI11 to TI13, the program won't start until you have a valid license (dongle or network license).