Tems Investigation 9.1 (emulator + dump) patch [Archive]

DooDg

2011-04-25, 01:23 AM

Dear all,
this is my first post here in this forum, i would like to share this patch
during i am search on the net i found this patch for tems 9.1
the folder include :
1) HASPHL2007.exe
2) edgehasp.exe
3) 5CC31DE2.dmp
4) 5CC31DE2.dng
anyone know how to use the emulator and dump file, i got an error message: HASP key not found (H0007)
any one can advise

striker

2011-04-25, 02:46 AM

Dear all,
this is my first post here in this forum, i would like to share this patch
during i am search on the net i found this patch for tems 9.1
the folder include :
1) HASPHL2007.exe
2) edgehasp.exe
3) 5CC31DE2.dmp
4) 5CC31DE2.dng
anyone know how to use the emulator and dump file, i got an error message: HASP key not found (H0007)
any one can advise

these is not working...

DooDg

2011-04-25, 04:10 AM

these is not working...

did you tray it befor and didn't work ?

striker

2011-04-25, 04:12 AM

did you tray it befor and didn't work ?
yup these was shared already before..there is some license here fully working..just search...

DooDg

2011-04-25, 04:16 AM

yup these was shared already before..there is some license here fully working..just search...
where here please ? in this forum ? hlep please

mail2paturi

2011-04-25, 01:53 PM

Hi dude,

you can find it here which was posted by me earlier long back....

TEMS9.1.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/gtmfI5qt/TEMS91.html)

Add rep and thanks if you find it useful....

Before installing it make sure that u have installed dotnetfx35.exe and then install this software it works........

butaktelco

2011-04-25, 09:25 PM

******** already share in here....:D
full feature working

DooDg

2011-04-25, 11:29 PM

Hi dude,

you can find it here which was posted by me earlier long back....

TEMS9.1.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/gtmfI5qt/TEMS91.html)

Add rep and thanks if you find it useful....

Before installing it make sure that u have installed dotnetfx35.exe and then install this software it works........
this is link for tems only without patch or emulator ? :confused:

DooDg

2011-04-25, 11:33 PM

******** already share in here....:D
full feature working
can u put the link for it

Stealth

2011-04-27, 09:35 PM

----------------

indoor

2011-06-17, 11:34 PM

This patch doesn't show up a licence file in the HASP reader tool. Does anyone know what equipment can be plugged into this for data collection? I have been playing around with my wife's old phones and sadly her Samsung U900 doesn't work.

patarian

2011-07-01, 09:02 PM

i tried to search for ******** TEMS 9 but i couldn't fing will any1 plz share me the forum link so that i can get the emulator thanks.

mail2paturi

2011-07-04, 09:09 PM

i tried to search for ******** TEMS 9 but i couldn't fing will any1 plz share me the forum link so that i can get the emulator thanks.

Dear patarian,

As per your request i am re-uploading the tem 9.1 *****ed version with .net35 fx and drivers and complete set.

Just first install the .net35 fx and then install the tems 9.1 exe after installation a comand promt will run itself to patch it internally.

No emulator its a inner programmed file which is default *****ed.

mail2paturi

2011-07-04, 09:10 PM

Here are the links

 TEMS9.1.part1.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/_spMZF8Y/TEMS91part1.html)

TEMS9.1.part2.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/eQlJ0Tlt/TEMS91part2.html)

TEMS9.1.part3.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/K7A59krL/TEMS91part3.html)

TEMS9.1.part4.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/10Oaq9ck/TEMS91part4.html)

TEMS9.1.part5.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/WIJHKolF/TEMS91part5.html)

indoor

2011-07-04, 10:26 PM

Many thanks mail2Paturi explains the lack of details on the HASP reader tool.

Now to work out how to get the U900 to be detected properly as it's currently detected as in the Equipment configuration as an E******* W25 (which is odd as that's a 3G router) but on the Tems Device Manager as a Qualcomm TM6275 which I assume is the correct one.

telwind

2011-07-05, 12:42 AM

Thanks for share.

Anyone have tested it? Does it work with RA? I am going to try it but will take long time to download it. Hope someone test and report here.

kaizzer545

2011-07-06, 02:23 AM

Dear all, please help me because I can't connect any equipment to start to use TEMS? does it is just a emulator??

PLEASE HELP ASAP

patarian

2011-07-06, 04:31 AM

Many Many Thanks mail2paturi for uploading the TEMS 9 i appreciate ur sharing this kind of stuff. again Thanks:kiss::D;)

kaizzer545

2011-07-06, 09:15 AM

Dear all, please help me because I can't connect any equipment to start to use TEMS? does it is just a emulator??

PLEASE HELP ASAP

Dear all how can I start to use it??? no detect my phone ...

BR

DooDg

2011-07-06, 07:18 PM

Here are the links

 TEMS9.1.part1.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/_spMZF8Y/TEMS91part1.html)

TEMS9.1.part2.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/eQlJ0Tlt/TEMS91part2.html)

TEMS9.1.part3.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/K7A59krL/TEMS91part3.html)

TEMS9.1.part4.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/10Oaq9ck/TEMS91part4.html)

TEMS9.1.part5.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/WIJHKolF/TEMS91part5.html)

many many thanks to u for this share

Gutoto

2011-09-08, 09:50 PM

Thanks for the share mal2paturi. i can install the software, i open it, it detects the phone, but it always says "NO LICENSE" on the Equipment Configuration window. I tried it with a GENUINE W995 and with a FLASHED K800i, but it always says the same, NO LICENSE. what can i do to connect my phones?

thanks very much again

capcipcup

2011-09-09, 11:11 AM

Thanks for the share mal2paturi. i can install the software, i open it, it detects the phone, but it always says "NO LICENSE" on the Equipment Configuration window. I tried it with a GENUINE W995 and with a FLASHED K800i, but it always says the same, NO LICENSE. what can i do to connect my phones?

thanks very much again

try to clean uninstall, remove all tems usb emul on system > device manager
it worked for me

k_RF

2011-09-09, 12:15 PM

which folder is the .netfx35.exe file in, i downloaded the link but dont find it.
Can you please suggest where to look for it.

Thanks you.

capcipcup

2011-09-09, 12:19 PM

which folder is the .netfx35.exe file in, i downloaded the link but dont find it.
Can you please suggest where to look for it.

Thanks you.

try google it dotnet35

Gutoto

2011-09-09, 05:33 PM

thanks for the answer. i tried what you said, and seems OK! I connected my K800i successfully, but i'm having problems connecting my W995. It detects it, and when i try to connect it, it only connects the DC1, and not the MS1 part. wht do you think it can be?

thanks so much again for your help

try to clean uninstall, remove all tems usb emul on system > device manager
it worked for me

Gutoto

2011-09-10, 12:00 AM

almost forgot,

TEMS doesn't recognize my phone as W995, it writes: "Sony E******* EMP Generic". I tried variuos UEdescription files from the forum, also one from UEL888 and one from TELWIND, but always the same results... only DC1 connects :(...

any help is highly appreciated

capcipcup

2011-09-12, 02:12 PM

almost forgot,

TEMS doesn't recognize my phone as W995, it writes: "Sony E******* EMP Generic". I tried variuos UEdescription files from the forum, also one from UEL888 and one from TELWIND, but always the same results... only DC1 connects :(...

any help is highly appreciated

i don't have w995 :D
perhaps you could find correct driver for w995 for TI9.1

serbesi

2011-09-12, 05:31 PM

thanks for the kind answer. i tried 2 different drivers, but it's always the same, it always recognizes it as "Sony E******* EMP Generic" :( and doesn't connect it

k_RF

2011-09-13, 01:25 PM

Does this one work with z750i ?

ching2-o

2011-09-13, 01:28 PM

Does this one work with z750i ?

TEMS 9.0 and above versions support TEMS Z750i check Ascom site

k_RF

2011-09-13, 01:33 PM

I mean does this *****ed version of TEMS work with z750a.
I have a z750a (americas) version instead of the z750i.

ching2-o

2011-09-13, 01:54 PM

I mean does this *****ed version of TEMS work with z750a.
I have a z750a (americas) version instead of the z750i.

As long as it is a TEMS phone and not the retail one, you can work with it. its for you to evaluate this shared meded TEMS. the idea is 9.0 above supports z750 tems phones, then it should work, if this tems will also work.

k_RF

2011-09-13, 02:24 PM

This is z750a is a retail phone, not a test UE. What could be the problem using this to record logs?

Can you suggest from where i can buy a tems phone?

ching2-o

2011-09-13, 02:30 PM

This is z750a is a retail phone, not a test UE. What could be the problem using this to record logs?

Can you suggest from where i can buy a tems phone?

retail phones cannot connect to tems investigation. there is special firmware as well as license to activate in order to work with tems tool

check your pm bro..;)

rkdrkd

2011-09-13, 03:08 PM

retail phones cannot connect to tems investigation. there is special firmware as well as license to activate in order to work with tems tool

check your pm bro..;)

I am interested to get tems enable phone license or firmwire

ching2-o

2011-09-13, 03:15 PM

I am interested to get tems enable phone license or firmwire

please check your pm

serbesi

2011-09-13, 04:18 PM

i haven't tried with the Z750, as i don't have one..

harish verma

2011-12-22, 07:49 PM

can any body tell that while iam click on the attached finetopix attachement it shows to me that iam unable to see or download the attchement
Pls help me.......

kangoo

2012-12-03, 11:46 PM

Hi,

I was using one original TI 8.0.3 and I've already uninstalled it but I still can't make 9.1 version to connect my devices (PCTEL WCDMA scanner and K800i Tems). The provided dotnet35fx.exe is also installed.

Raymon

2013-03-19, 06:34 AM

Try this one!

http://rapidshare.com/files/252016699/TEMS_9.0.********.rar

Ray!

akram anwar

2013-04-14, 04:41 PM

is that working in windows 7?

marss

2013-05-24, 11:27 AM

Try this one!
http://rapidshare.com/files/252016699/TEMS_9.0.********.rar
Ray!

File not exist!!!

papasfritas

2013-06-05, 06:10 AM

yeap link dont work, any new links