Walid Madih
2011-03-30, 11:31 PM
Hi all,
Intra-frequency measurements
Reporting event 1A: A Primary CPICH enters the reporting range
Reporting event 1B: A primary CPICH leaves the reporting range
Reporting event 1C: A non-active primary CPICH becomes better than an active primary CPICH
Reporting event 1D: Change of best cell
Reporting event 1E: A Primary CPICH becomes better than an absolute threshold
Reporting event 1F: A Primary CPICH becomes worse than an absolute threshold Intra-frequency reporting events for TDD
Reporting event 1G: Change of best cell (TDD)
Reporting event 1H: Timeslot ISCP below a certain threshold (TDD)
Reporting event 1I: Timeslot ISCP above a certain threshold (TDD)
Inter-frequency measurements
Event 2a: Change of best frequency.
Event 2b: The estimated quality of the currently used frequency is below a certain threshold and the estimated quality of a non-used
frequency is above a certain threshold
Event 2c: The estimated quality of a non-used frequency is above a certain threshold
Event 2d: The estimated quality of the currently used frequency is below a certain threshold
Event 2e: The estimated quality of a non-used frequency is below a certain threshold
Event 2f: The estimated quality of the currently used frequency is above a certain threshold
Inter-RAT measurements
Event 3a: The estimated quality of the currently used UTRAN frequency is below a certain threshold and the estimated quality of the other system is above a certain threshold
Event 3b: The estimated quality of other system is below a certain threshold
Event 3c: The estimated quality of other system is above a certain threshold
Event 3d: Change of best cell in other system
UE internal measurements
Reporting event 6A: The UE Tx power becomes larger than an absolute threshold
Reporting event 6B: The UE Tx power becomes less than an absolute threshold
Reporting event 6C: The UE Tx power reaches its minimum value
Reporting event 6D: The UE Tx power reaches its maximum value
Reporting event 6E: The UE RSSI reaches the UE's dynamic receiver range
Reporting event 6F: The UE Rx-Tx time difference for a RL included in the active set becomes larger than an absolute threshold
Reporting event 6G: The UE Rx-Tx time difference for a RL included in the active set becomes less than an absolute threshold
Walid
Intra-frequency measurements
Reporting event 1A: A Primary CPICH enters the reporting range
Reporting event 1B: A primary CPICH leaves the reporting range
Reporting event 1C: A non-active primary CPICH becomes better than an active primary CPICH
Reporting event 1D: Change of best cell
Reporting event 1E: A Primary CPICH becomes better than an absolute threshold
Reporting event 1F: A Primary CPICH becomes worse than an absolute threshold Intra-frequency reporting events for TDD
Reporting event 1G: Change of best cell (TDD)
Reporting event 1H: Timeslot ISCP below a certain threshold (TDD)
Reporting event 1I: Timeslot ISCP above a certain threshold (TDD)
Inter-frequency measurements
Event 2a: Change of best frequency.
Event 2b: The estimated quality of the currently used frequency is below a certain threshold and the estimated quality of a non-used
frequency is above a certain threshold
Event 2c: The estimated quality of a non-used frequency is above a certain threshold
Event 2d: The estimated quality of the currently used frequency is below a certain threshold
Event 2e: The estimated quality of a non-used frequency is below a certain threshold
Event 2f: The estimated quality of the currently used frequency is above a certain threshold
Inter-RAT measurements
Event 3a: The estimated quality of the currently used UTRAN frequency is below a certain threshold and the estimated quality of the other system is above a certain threshold
Event 3b: The estimated quality of other system is below a certain threshold
Event 3c: The estimated quality of other system is above a certain threshold
Event 3d: Change of best cell in other system
UE internal measurements
Reporting event 6A: The UE Tx power becomes larger than an absolute threshold
Reporting event 6B: The UE Tx power becomes less than an absolute threshold
Reporting event 6C: The UE Tx power reaches its minimum value
Reporting event 6D: The UE Tx power reaches its maximum value
Reporting event 6E: The UE RSSI reaches the UE's dynamic receiver range
Reporting event 6F: The UE Rx-Tx time difference for a RL included in the active set becomes larger than an absolute threshold
Reporting event 6G: The UE Rx-Tx time difference for a RL included in the active set becomes less than an absolute threshold
Walid