senjamir
2011-03-29, 12:04 AM
Tasks:
Audit a 3G RAN network and provide recommendations for network improvement.
RF Design review.
RAN configuration and parameters/features review.
HSDPA review.
KPI Analysis from OMC-R and troubleshooting.
Capacity analysis and recommendations (Channel Element, Codes, Carrier, Iub, RNC).
Drive-Test post-processing and reporting including recommendations.
Requirements:
At least 3 years experience in 3G/HSDPA RF Optimisation.
Must have good knowledge of either Huawei and/or E******* RAN (parameters, features, counters).
Knowledge of NEMO ANALYZER considered a plus.
2G
Cybercom is looking for a 2G Radio/BSS Optimisation Engineer:
Tasks:
Audit a 2G Radio/BSS network and provide recommendations for network improvement.
RF Design review.
BSS configuration and parameters/features review.
EDGE/GPRS review.
KPI Analysis from OMC-R and troubleshooting.
Capacity analysis and recommendations (sdcch, tch, edge/gprs, Abis, BSC).
Drive-Test post-processing and reporting including recommendations.
Requirements:
At least 3 years experience in GSM RF Optimisation.
Must have good knowledge of Alcatel and/or Huawei BSS (parameters, features, counters).
Knowledge of NEMO ANALYZER considered a plus.
Audit a 3G RAN network and provide recommendations for network improvement.
RF Design review.
RAN configuration and parameters/features review.
HSDPA review.
KPI Analysis from OMC-R and troubleshooting.
Capacity analysis and recommendations (Channel Element, Codes, Carrier, Iub, RNC).
Drive-Test post-processing and reporting including recommendations.
Requirements:
At least 3 years experience in 3G/HSDPA RF Optimisation.
Must have good knowledge of either Huawei and/or E******* RAN (parameters, features, counters).
Knowledge of NEMO ANALYZER considered a plus.
2G
Cybercom is looking for a 2G Radio/BSS Optimisation Engineer:
Tasks:
Audit a 2G Radio/BSS network and provide recommendations for network improvement.
RF Design review.
BSS configuration and parameters/features review.
EDGE/GPRS review.
KPI Analysis from OMC-R and troubleshooting.
Capacity analysis and recommendations (sdcch, tch, edge/gprs, Abis, BSC).
Drive-Test post-processing and reporting including recommendations.
Requirements:
At least 3 years experience in GSM RF Optimisation.
Must have good knowledge of Alcatel and/or Huawei BSS (parameters, features, counters).
Knowledge of NEMO ANALYZER considered a plus.