ptl9699
2011-03-24, 02:43 PM
Hi Everyone, attached is a presentation detailing UTRAN Signaling Sequences. This presentation is non-vendor specific and contains the following:
1. RRC Connection Setup into state CELL_DCH
2. RRC Connection Establishment to RRC state CELL_FACH
3. Radio Access Bearer Establishment from CELL_DCH with DCH Setup - synchronized
4. Radio Bearer Setup in state CELL_DCH with DCH required - unsynchronized
5.Radio Bearer Setup in RRC state CELL_FACH with DCH required
6. Radio Bearer Setup in RRC state CELL_FACH with FACH required
7. Soft Handover - Radio Link Addition and Deletion
8. Hard Handover without Serving RNC Relocation
9. Hard Handover with Serving RNC Relocation
10. Switch from CELL_DCH to CELL_FACH with Drift RNC
11. Cell Update without Serving RNC Relocation
If ever you find this document useful, please add rep and click thanks :) It would be greatly appreciated :)
1. RRC Connection Setup into state CELL_DCH
2. RRC Connection Establishment to RRC state CELL_FACH
3. Radio Access Bearer Establishment from CELL_DCH with DCH Setup - synchronized
4. Radio Bearer Setup in state CELL_DCH with DCH required - unsynchronized
5.Radio Bearer Setup in RRC state CELL_FACH with DCH required
6. Radio Bearer Setup in RRC state CELL_FACH with FACH required
7. Soft Handover - Radio Link Addition and Deletion
8. Hard Handover without Serving RNC Relocation
9. Hard Handover with Serving RNC Relocation
10. Switch from CELL_DCH to CELL_FACH with Drift RNC
11. Cell Update without Serving RNC Relocation
If ever you find this document useful, please add rep and click thanks :) It would be greatly appreciated :)