View Full Version : HSDPA
Arnie
2011-02-03, 12:28 AM
A newly integrated 3G site not picking any HS traffic.What could be the possible reason?
A newly integrated 3G site not picking any HS traffic.What could be the possible reason?
Are the HS channels unlocked and enabled?
Do you have the appropriate license to activate HS? Is it HS capable?
rne_battou
2011-02-06, 10:58 PM
Greetings
There is a group of HSPA paramaters that you most check
Greetings
There is a group of HSPA paramaters that you most check
if this is hw. then check DSP CELLCHK to see if nodeB/rnc are HS capable
then check configuration. If IP, then check IPPATH. if ATM, then check AAL2PATH objects (both sides, nodeB and RNC)
patek1968
2011-02-07, 02:21 PM
If this is Huawei, check for the alarms..LST ALMAF..
patek1968
2011-02-07, 02:26 PM
If this is Huawei, check for the alarms..LST ALMAF..
maxim1
2011-02-09, 07:02 AM
what is the vendor ?
check hspa parameters in RNC and Node b
make sure LK are loaded in WBTS
check Iub configuration
More info required
Femto
2011-02-10, 08:40 AM
If HSDPA power allocation is set to fixed make sure it's set to a reasonable non-zero value
patek1968
2011-02-10, 12:00 PM
Your not picking HS traffic? it means you can connect but no throughput?or you cant connect at all?
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.