mojash
2011-01-10, 04:41 PM
Hi,
MSS 2.2 to MSS 4.1 Upgrade Release Warnings (MSC-S part)
Contents
1 Revision Information 2
2 Introduction 2
3 Implementation of the MSC Upgrade. 2
3.1 Base SW level: 2
3.2 Target SW level 2
3.3 Check what RPCs and China market optional features are loaded into the site on R10. And prepare the corresponding corrections loading files for R12.1. 2
3.4 Possible international call failure and/or wrong called party number in CDR in R12.1 3
3.5 Prepare the PRBT DATA beforehand and load it in SB side before FCSWI. 5
3.6 AXE parameter DMHSUPPORTED should be 0. Otherwise charging redundancy data will be not transferred. 9
3.7 Screen Masks are needed to add manually in phase 2170 before FCSWI. 10
3.8 CHSFILTABLE is used for setting the charging filters in R12.1, and it is not used in R10, the table is empty in R10, then the CHSFILTABLE will be overwritten by FCDAT. So the table is needed to reload it in SB side before FCSWI. 10
3.9 Call Waiting Announcement RPC 14
3.10 AXE parameter changing in R12.1 if SIGTRAN is used before FCSWI. 15
3.11 For APZ212 40 only, Middleware should be checked after upgrade. 15
3.12 CHECK_FCEPS in PHASE_1860 16
4 MSC Problem List and Activity List on FOA site 16
5 REFERENCE 18
add rep and thanks if useful :)
MSS 2.2 to MSS 4.1 Upgrade Release Warnings (MSC-S part)
Contents
1 Revision Information 2
2 Introduction 2
3 Implementation of the MSC Upgrade. 2
3.1 Base SW level: 2
3.2 Target SW level 2
3.3 Check what RPCs and China market optional features are loaded into the site on R10. And prepare the corresponding corrections loading files for R12.1. 2
3.4 Possible international call failure and/or wrong called party number in CDR in R12.1 3
3.5 Prepare the PRBT DATA beforehand and load it in SB side before FCSWI. 5
3.6 AXE parameter DMHSUPPORTED should be 0. Otherwise charging redundancy data will be not transferred. 9
3.7 Screen Masks are needed to add manually in phase 2170 before FCSWI. 10
3.8 CHSFILTABLE is used for setting the charging filters in R12.1, and it is not used in R10, the table is empty in R10, then the CHSFILTABLE will be overwritten by FCDAT. So the table is needed to reload it in SB side before FCSWI. 10
3.9 Call Waiting Announcement RPC 14
3.10 AXE parameter changing in R12.1 if SIGTRAN is used before FCSWI. 15
3.11 For APZ212 40 only, Middleware should be checked after upgrade. 15
3.12 CHECK_FCEPS in PHASE_1860 16
4 MSC Problem List and Activity List on FOA site 16
5 REFERENCE 18
add rep and thanks if useful :)