UMTS Network KPI

[quangforever88]

UMTS Network KPI
1 Introduction.
1.1 Summary of Level-1 KPI and Targets.
2 Performance Commitments and Requirements..
2.1 Milestone Definition..
2.2 Scope.
2.3 General Requirements.
2.4 Contractual KPI Commitments.
3 UTRAN Level-1 Key Performance Indicators..
3.1 Circuit Switched Level-1 Key Performance Indicators.
3.1.1 Circuit Switched Call Setup.
3.1.2 RRC Establishment Causes.
3.1.3 CSV Access Failure.
3.1.4 CSV Drop.
3.1.5 CSV Quality.
3.1.6 CSV Cell Capacity.
3.1.7 CSV Soft/Softer Handover Overhead.
3.1.8 CSV Inter-Radio Access Technology Handover Failure.
3.1.9 CSV Call Setup Time.
3.1.10 CSD Access Failure.
3.1.11 CSD Drop.
3.1.12 CSD Quality.
3.1.13 CSD Call Setup time.
3.2 Packet Switched Level-1 Key Performance Indicators.
3.2.1 Packet Switched Call Setup.
3.2.2 PSD Access Failure.
3.2.3 PSD Drop.
3.2.4 PSD Latency.
3.2.5 PSD Throughput
3.2.6 PSD Call Setup Time.
3.2.7 PSD Inter-Radio Access Technology Handover Failure.
3.2.8 PSD IRAT Interruption time.
3.2.9 HSDPA Access Failure.
3.2.10 HSDPA Drop.
3.2.11 HSDPA Latency.
3.2.12 HSDPA Throughput
3.2.13 HSUPA Throughput
3.2.14 HSDPA Data Session Setup Time.
3.3 System Availability.
3.3.1 Average Cell Availability.
3.3.2 Average Cell Non-Maintenance Availability.
3.4 Comparison of UMTS and GSM Network Performance.
3.5 Impact of UMTS on GSM Network Performance.
4 UTRAN Level-2 Key Performance Indicators.
:p:p:p:p:p:p

[quangforever88]

1 Introduction
2 Prerequisites
3 Preparation
3.1 Defining Clusters borders and Drive Routes
3.1.1 The necessary equipment tools per drive test team.
3.1.2 Prerequisites Data
3.2 Drive Test Hardware Configuration
3.3 Drive Test Software Configuration
4 System Test Methodology
4.1 Static Test General Setting/Setup and Condition
4.1.1 S3: Mobile to Mobile Voice Call Setup Time
4.1.2 S4: Mobile to PSTN Voice call setup time
4.1.3 S8: Video call setup time
4.1.4 S9: UL & DL BLER
4.1.5 S10: Latency (continuous ping)
4.1.6 S11: Latency (Initial ping)
4.1.7 S12: HSDPA DL Average Throughput
4.1.8 S13: HSDPA UL Average Through-put
4.1.9 S15: Multi-RB test
4.2 Cluster Drive
4.2.1 ROUND 1: SYSTEM Drive Test KPI’s - S1, S2 & S14
4.2.2 ROUND 2: SYSTEM Drive Test KPI’s – S6, S7, &S12
4.2.3 ROUND 3: SYSTEM Drive Test KPI’s – S5, S12 &S24
4.2.4 ROUND 4: SYSTEM Drive Test KPI’s -S16, S17, S18, S19 & requirement
4.2.5 ROUND 5: SYSTEM Drive Test KPI’s - S13, S22 &S23
4.2.6 ROUND 6: SYSTEM Drive Test KPI’s - S12 &S13
4.2.7 ROUND 7: SYSTEM Drive Test KPI’s - S14 & Requirement
4.2.8 ROUND 8: SYSTEM Drive Test Requirements
4.2.9 Inter-frequency Mobility
4.2.10 ROUND 9: SYSTEM Drive Test KPI’s (Require 2nd carrier) – S18, S20, S21& Requirement
4.2.11 ROUND 10: SYSTEM Drive Test KPI’s (Require 2nd carrier) –S22 & S23
4.2.12 ROUND 11: SYSTEM Drive Test KPI’s (Required IuR) – S23
4.2.13 ROUND 12: SYSTEM Drive Test KPI’s (Required IuR) – S22
4.3 Final Results
5 Reference
Maxis 3G SYSTEM Test KPI Methodology.rar - 4shared.com - online file sharing and storage - download (http://www.4shared.com/file/nFKyR0le/Maxis_3G_SYSTEM_Test_KPI__Meth.html)
:p:p:p:p:p