mirc84
2010-10-19, 07:31 PM
Hello,
I'm working on a huawei ran12 equipment. Since the upgrade from ran10 on all smartphones i can always see hsdpa indicator while in idle mode.
Why this is not ok? Because our network has 2 freq, one is configured with r99 and free for the ue to camp on, while the other cell in reserved and used for hsdpa and r99.
So i should see hsdpa indicator only when i'm on 2'nd carrier. When i have a pdp activated but due to no traffic i go back to 1'st carrier i should see 3g indication.
I noticed this in a qxdm trace, but unfortunately i did not made a trace on ran 10.
Do you have any ideea about how this parameter is set by huawei network? it seems that it cannot be set by operator.
I assumed it is set automatically when user sets a hs-dsch channel in the cell, but i have no such channel in the 1'st carrier cell.
Thank you!
I'm working on a huawei ran12 equipment. Since the upgrade from ran10 on all smartphones i can always see hsdpa indicator while in idle mode.
Why this is not ok? Because our network has 2 freq, one is configured with r99 and free for the ue to camp on, while the other cell in reserved and used for hsdpa and r99.
So i should see hsdpa indicator only when i'm on 2'nd carrier. When i have a pdp activated but due to no traffic i go back to 1'st carrier i should see 3g indication.
I noticed this in a qxdm trace, but unfortunately i did not made a trace on ran 10.
Do you have any ideea about how this parameter is set by huawei network? it seems that it cannot be set by operator.
I assumed it is set automatically when user sets a hs-dsch channel in the cell, but i have no such channel in the 1'st carrier cell.
Thank you!