Call Trace on Huawei RNC/M2000

[salamanda1969]

Hello engineers,

Can someone provide guidelines or document on how to start a call trace in Huawei RNC or M2000 ? Many thanks.

slm

[mirc84]

What kind of trace (which interface)? Maybe i could gve you some screenshot. Anyway i think help documents are quite ok to give yoi a starting point

[kaizzer545]

yes, but i can not upload snapshot cause it is on the other machine, but in RNC i supposed that there is a slide call "trace" in that you can trace all links, I mean Gb, Abis, A, Ater, it depends what you want

Hope this be useful 4 u, regards

[moh_sulaiman]

can some one share tool for analyses of traces.

br

[salamanda1969]

Thanks Guys,

found out that we have to use the RNC LMT (not NodeB LMT) to trace calls. Will try it out soon.

Cheers

[relaxrf]

there is Trace Viewer to read the data right?

[mon3em]

there is Trace Viewer to read the data right?

there is a trace viewer within the LMT ... to view IOS, CDT, .....etc

But for CHR you need Omstar for RAN6
& for newer version of RAN (up to RAN12) you can read CHR by PCHR.


All above tools are here in forum .. just do a little bit search ... :)

[thanhv2541]

only trace on LMT client, with M2000 can't trace

[sonerss]

You can use LMT or PCHR

[Laughing]

Hello engineers, Can someone provide guidelines or document on how to start a call trace in Huawei RNC or M2000 ? Many thanks. slm Hello, To trace a call, you need to have IMSI or MSISDN number. With BSC6000 or BSC6900, you can choose UE Trace for 3G or CS User Trace for 2G. It's simple action. Do you any request ?

[essalvador]

there is a trace viewer within the LMT ... to view IOS, CDT, .....etc

But for CHR you need Omstar for RAN6
& for newer version of RAN (up to RAN12) you can read CHR by PCHR.




All above tools are here in forum .. just do a little bit search ... :)


excuse me but PCHR for R12 dost not be provided on the forum.

[agenov]

There is but for very early version of RAN12 that is not applicable for the lastes one.


excuse me but PCHR for R12 dost not be provided on the forum.

[essalvador]

There is but for very early version of RAN12 that is not applicable for the lastes one.

of course i have downloaded pchr from this forum i need the header decoder for R12 (*.xml) :)

[dodotiro]

Hello, To trace a call, you need to have IMSI or MSISDN number. With BSC6000 or BSC6900, you can choose UE Trace for 3G or CS User Trace for 2G. It's simple action. Do you any request ?

you can follow my step as in attachment. i hope it can help you

[didemir]

hi,
here waht we use for tracing :
22705
for 2G ue trace
at m200 for 2G use command DSP CALLRES. run command in the BSC that ue is in. you should use as IMSI or MSISDN of caller, not the number you will trace. This command also runs through LMT.

for 3G ue trace get in the RNC through LMT. at left bottom choose maintenance. then choose under service\realtime performance monitoring\connection performans monitoring


hope it helps you