Need Help = *.dpa antenna Pattern

[koepret]

Dear all

Need your Help ,
i have pattern Antenna with *.dpa File ,
atoll not Support this file ,

Can share What tool can Support this Antenna Pattern ..?
What Software can Convert *.dpa to *.msi..?
or Any Body have *.msi Pattern for Antenna
KMW DA-X-AW-14-65-02T3_2180MHz_DAS.dpa

Please help

Thanks a lot
Koepret

[redendo]

This format is supported by planet tool


Dear all

Need your Help ,
i have pattern Antenna with *.dpa File ,
atoll not Support this file ,

Can share What tool can Support this Antenna Pattern ..?
What Software can Convert *.dpa to *.msi..?
or Any Body have *.msi Pattern for Antenna
KMW DA-X-AW-14-65-02T3_2180MHz_DAS.dpa

Please help

Thanks a lot
Koepret

[redernesto]

Antenna Pattern .dpa is used in Mentum Planet, the version i know is 4.3 and 4.5

The last version 5.2 do not support .dpa, it support .paf, if you have the software you can convert from .dpa to .paf

[koepret]

Antenna Pattern .dpa is used in Mentum Planet, the version i know is 4.3 and 4.5

The last version 5.2 do not support .dpa, it support .paf, if you have the software you can convert from .dpa to .paf

.paf also not Support by Atoll
Actually , i want use this antenna in Atoll , so any body know what tool can convert .dpa to .txt or .msi ..?

Thanks a lot for your support

koepret

[telwind]

try to open it by NotePad, if ok you can import into Atoll

[freakturd06]

Yep, you can try to open in notepad and sve as excel file. And in the antenna data, add the antenna type and edit properties. Copy/paste horizontal and vertival pattern respectively.

[Optim]

Hi;

*.dpa extension is for planet ev antenna pattern and you can edit them using Antenna Editor (C:\Program Files\Mentum\Planet) the name of tool is AntennaEditor..is in attached file.

[cooltyger]

Exporting the values from *.dpa file to excel and then updating the table in Atoll antenna format doesnt provide the exact antenna pattern. You can compare the antenna patterns. Some values required miss, as the dpa has -180 to 0 to 180 where as the other is 0 to 360, also some values are not available.
Better to check with vendor for exact Atoll file.

BRs
CT

[Optim]

please go om site web on constructor and sure you will find possibility to export the antennas pattern on atol format.