THE HUNT! Emuls, Dongles, Tools, etc...

[inboxmehere]

I am not sure about the veterans, but i am getting back into the swing of things after a 10 + years removed for the warm glow of Softice and "****-A-Tack" :) any body remember... It's been one H#%LL of a time trying to find what I need to get going on AIRCOM Enterprise 6.2. I spent all of a week reading, searching, learning, threading... and still not much, So, this is an APB to get going a one stop shop for "Tools of the Trade"

Please Share! the knowledge is what we need, NO Hand outs.

Tools, Knowledge and Resources if you have to share.

The comradery here is unbeliveable. Dame cool to see people helping others simply because... no bs, just because. Much appreciated, have fun and learn while doing it.

[marceloenrique]

I am not sure about the veterans, but i am getting back into the swing of things after a 10 + years removed for the warm glow of Softice and "****-A-Tack" :) any body remember... It's been one H#%LL of a time trying to find what I need to get going on AIRCOM Enterprise 6.2. I spent all of a week reading, searching, learning, threading... and still not much, So, this is an APB to get going a one stop shop for "Tools of the Trade"

Please Share! the knowledge is what we need, NO Hand outs.

Tools, Knowledge and Resources if you have to share.

The comradery here is unbeliveable. Dame cool to see people helping others simply because... no bs, just because. Much appreciated, have fun and learn while doing it.

Welcome friend

1 .- The first is that you must share knowledge.
2 .- You must earn the trust of users for.
3 .- At some point you need to be delivered.

jejejejej

saludos

marceloenrique

[inboxmehere]

Wlscgen 8.2
http://www.4shared.com/file/NFXX7Wvj/wlscgen.html

AIRCOM Enterprise 6.2
http://www.4shared.com/file/gkSfbR6Q/AIRCOM_Enterprise_62.html

emul for wlscgen 8.2 : pass courtesy of yogi_saw @yogi_saw Thank you very much for this one, it really helped me out!
http://www.4shared.com/file/jwO6R-xL/emul_for_wlscgen_82.html

lsdecode 8.2.2.300
http://www.4shared.com/file/vns3mjNn/lsdecode.html

Sentinal RMS Development Kit 8.0.6
http://www.4shared.com/file/8mjS0wKN/SLM_8060.html

SLM Decode
http://www.4shared.com/file/KhfU01Kx/slmdec.html

SLMkit
http://www.4shared.com/file/8GhIP2XK/Slmtkit.html

DSF TORO Emul ::Sorry for the late reply for this one! Here you go.

http://www.4shared.com/file/116205403/88f229a8/DONGLE_EMULATOR.html

FlexLM SDK 11 : I belive this is the 11 SDK, anyone can verify?
http://www.4shared.com/file/HRzeC4Ib/flexlmif86_n3.html (http://www.4shared.com/file/HRzeC4Ib/flexlmif86_n3.html)

lsdecode105 by DCA; This lsdecode provided by DCA is the 8.3.0.900 version modified to provide the secrets..., etc. I recommend if you have not tried to do this using a debugger, try it. It is worth knowing, but this is an easier route!
http://www.finetopix.com/showpost.php?p=89444&postcount=5 Thanks DCA!
http://www.4shared.com/file/s1azfg4B/lsdecode105.html password courtesy of DCA


I will continue to add what ever I find, when I find it or "fix" it. To help keep them in a single location. Please Add rep and thanks if you have downloaded. Thanks!:)

[inboxmehere]

@marceloenrique (http://www.finetopix.com/member.php?u=9638)
I Absolutely agree! I kinda figured that, so here is my start! Thanks much marceloenrique (http://www.finetopix.com/member.php?u=9638) I giving a 100% effort to making this post as useful as possible.

[leosedf]

Well.... These days IDA Pro is one of the most powerfull tools.

[inboxmehere]

@leosedf
Your right, I totally forgot about IDA

IDA Pro 5.5
http://www.4shared.com/file/TJI3Raxf/IDAProAdvancedv55inclHexRaysDe.html
>> BIG Up's to http://www.demonoid.com/images/p.gifnoptical (http://www.demonoid.com/users/noptical) for the upload

Thanks leosedf:cool:

[DCA]

Softice brings back memories :D
The good old days.....

[leosedf]

Softice brings back memories :D
The good old days.....

True.. Also W32Dasm :):)

[inboxmehere]

Softice brings back memories :D
The good old days.....

I when back to my ZIP drives "Yes as in ZIP and JAZ drives" I found a copy of Softice 2.6 Driver Suite.

@DCA Thanks for that one.;) It may help someone who needs this particular version.

SoftICE 2.6 Driver Suite
http://www.4shared.com/file/-sFGhir8/SoftIce.html

I actually found some of my custom made Phreaking tools as well, Got a good laugh out of that one!":call:"

[inboxmehere]

These to books will answers quite a bit of questions in reversing and wireless technologies,

http://avaxhome.ws/ebooks/engeneering_technology/wireless/075066788595-1282820700.html

http://avaxhome.ws/ebooks/programming_development/general/reversing_secrets_of_reverse_eng.html

No Pm needed for anything,
Thanks and Rep helps though:cool:

[inboxmehere]

Someone asked me about this, so here you go!

Hexworkshop 6.0.1.4603 patch

[inboxmehere]

Also, Globalmapper is a great all around mapping utility. For some Site Tower planning this tool provides a very good View Shed Analysis with great options such as; LOS. I will not pot a link only because it is already readily available on the web, however if you can not find it, PM me.:victory:

[Optim]

Wlscgen 8.2
http://www.4shared.com/file/NFXX7Wvj/wlscgen.html

AIRCOM Enterprise 6.2
http://www.4shared.com/file/gkSfbR6Q/AIRCOM_Enterprise_62.html

emul for wlscgen 8.2 : pass courtesy of yogi_saw @yogi_saw Thank you very much for this one, it really helped me out!
http://www.4shared.com/file/jwO6R-xL/emul_for_wlscgen_82.html

lsdecode 8.2.2.300
http://www.4shared.com/file/vns3mjNn/lsdecode.html

Sentinal RMS Development Kit 8.0.6
http://www.4shared.com/file/8mjS0wKN/SLM_8060.html

SLM Decode
http://www.4shared.com/file/KhfU01Kx/slmdec.html

SLMkit
http://www.4shared.com/file/8GhIP2XK/Slmtkit.html

I will continue to add what ever I find, when I find it or "fix" it. To help keep them in a single location. Please Add rep and thanks if you have downloaded. Thanks!:)

Thanks friend.

Can I send you x-Parameters i you can give the *****.

Thanks.

[inboxmehere]

TORO DSF Emulator Added >>>:) link posted

[zeuscane]

The file could not be found. Please check the download link.

zeuscane

TORO DSF Emulator Added >>>:) link posted

[inboxmehere]

Sorry about that! I did not notice there were two links on the site i found it on.

Thanks again link updated,

[yogi_saw]

I don't know how did i miss this wonderful post
welldone inboxmehere all tools in one place,
Worth keeping as a bookmark...

request to admin thread should go sticky...

Speciak thanks to boytaylor for adding support for network lic in my reg he deserve it...

[inboxmehere]

@Yogi_Saw
Big thanks to you as well. I remember when I began in the field there was a since of "brotherhood" and respect amongst our colleagues. Everyone wanted to share and help each other for the sake of knowing and the craft. I still see some of this here. I felt it was worth trying to keep it going and helping other as I see you have all done here.

Well done Yogi! and a very Big Thank You!

[inboxmehere]

Links Added for:

lsdecode105

FlexLM SDK 11

[mojiiiiii]

Wlscgen 8.2
http://www.4shared.com/file/NFXX7Wvj/wlscgen.html

AIRCOM Enterprise 6.2
http://www.4shared.com/file/gkSfbR6Q/AIRCOM_Enterprise_62.html

emul for wlscgen 8.2 : pass courtesy of yogi_saw @yogi_saw Thank you very much for this one, it really helped me out!
http://www.4shared.com/file/jwO6R-xL/emul_for_wlscgen_82.html

lsdecode 8.2.2.300
http://www.4shared.com/file/vns3mjNn/lsdecode.html

Sentinal RMS Development Kit 8.0.6
http://www.4shared.com/file/8mjS0wKN/SLM_8060.html

SLM Decode
http://www.4shared.com/file/KhfU01Kx/slmdec.html

SLMkit
http://www.4shared.com/file/8GhIP2XK/Slmtkit.html

DSF TORO Emul ::Sorry for the late reply for this one! Here you go.

http://www.4shared.com/file/116205403/88f229a8/DONGLE_EMULATOR.html

FlexLM SDK 11 : I belive this is the 11 SDK, anyone can verify?
http://www.4shared.com/file/HRzeC4Ib/flexlmif86_n3.html (http://www.4shared.com/file/HRzeC4Ib/flexlmif86_n3.html)

lsdecode105 by DCA; This lsdecode provided by DCA is the 8.3.0.900 version modified to provide the secrets..., etc. I recommend if you have not tried to do this using a debugger, try it. It is worth knowing, but this is an easier route!
http://www.finetopix.com/showpost.php?p=89444&postcount=5 Thanks DCA!
http://www.4shared.com/file/s1azfg4B/lsdecode105.html password courtesy of DCA


I will continue to add what ever I find, when I find it or "fix" it. To help keep them in a single location. Please Add rep and thanks if you have downloaded. Thanks!:)



hi
can you put a training doc about this softwares?

[inboxmehere]

Although I personally will never say I Goo**led something a "search" turned up this for FlexLM. This might get you started with this
http://norsar.com/support.aspx?docid=525

&

Sentinal RMS Manuals can be found in the
SLM_8.0.6.0\Manuals on the installation ISO

[inboxmehere]

hi
can you put a training doc about this softwares?

I am not sure specifically which training docs you would like. most of these items do not come with training. However a very good portion of knowlege can be obtained via Wire Free Alliance

I do know that the User Guides as well as the Technical Refrences for Enterprise 6.2 can be found in the ....AIRCOM International\ENTERPRISE 6.2\Docs

FlexLM and Sentinal Docs "should" be readly avaliable on the www. If I find them for you I will surly post them for you.

[mojiiiiii]

Well done
inboxmehere (http://www.finetopix.com/member.php?u=33440)
! and a very Big Thank You!

[harrypotter]

Anyone can share the step by step procedure for asset? Please post brothers

[tremalnike]

Could anybody share free or cured emulator&dumper for HASP SRM ?

Thanks !

[jimjim]

Hello there,

Even though I do not use the tools, but I will add reps and thanks for the attitude.

Regards,:):):)