samcooldude1430
2010-08-12, 01:14 AM
Dear All,
Please find the software to create .dng file.:D and emulate.......:p
I got it through some other forum......:o
Sorry if already shared......:rolleyes:
INSTALLATION INSTRUCTIONS
1. Unzip and Unrar.
2. Make sure you have the latest Sentinel dongle drivers installed.
3. To dump and solve make sure the original Sentinel key is connected
to a LPT or USB port then Run EDGESPRO11.EXE in the EDGE dir.
4. Select the Sentinel tab, choose a filename for the result .dng
file, and press "Dump&Solve".
This can take some minutes depending on what type and how many
algorithms needs to be recovered.
The "Specify Developer Id" and "Specify Write Password" options
are for advanced users, and not required.
"Specify Developer Id" allows you to dump and solve from emulators
without physical dongle.
"Specify Write Password" allows you to dump faster, if you know
cell 4 (write password).
5 Now run SENTEMUL2007.EXE, go to the "Driver" tab, and press
"Install" button and if installation was successful driver
status window will be changed to: "Status : driver is installed".
6. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "SENTINEL Emulator Service
is running"
7. Open "Dongles" tab and press the "Load dump" button, then navigate
to the .dng file you created with EDGESPRO11.EXE
8. Enjoy!
Also remember some dongles cannot be dumped(ie .dng file cannot be created)....some other process require (already shared in this forum) to emulate that.....:D
Please pm me for pwd.....Junior member can also pm me for both pwd and 4shared link......
Please find the software to create .dng file.:D and emulate.......:p
I got it through some other forum......:o
Sorry if already shared......:rolleyes:
INSTALLATION INSTRUCTIONS
1. Unzip and Unrar.
2. Make sure you have the latest Sentinel dongle drivers installed.
3. To dump and solve make sure the original Sentinel key is connected
to a LPT or USB port then Run EDGESPRO11.EXE in the EDGE dir.
4. Select the Sentinel tab, choose a filename for the result .dng
file, and press "Dump&Solve".
This can take some minutes depending on what type and how many
algorithms needs to be recovered.
The "Specify Developer Id" and "Specify Write Password" options
are for advanced users, and not required.
"Specify Developer Id" allows you to dump and solve from emulators
without physical dongle.
"Specify Write Password" allows you to dump faster, if you know
cell 4 (write password).
5 Now run SENTEMUL2007.EXE, go to the "Driver" tab, and press
"Install" button and if installation was successful driver
status window will be changed to: "Status : driver is installed".
6. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "SENTINEL Emulator Service
is running"
7. Open "Dongles" tab and press the "Load dump" button, then navigate
to the .dng file you created with EDGESPRO11.EXE
8. Enjoy!
Also remember some dongles cannot be dumped(ie .dng file cannot be created)....some other process require (already shared in this forum) to emulate that.....:D
Please pm me for pwd.....Junior member can also pm me for both pwd and 4shared link......