View Full Version : file installation for Sentinel RMS Development Kit V 8.2.2.300
Dear All member
Do you have file installation for Sentinel RMS Development Kit V 8.2.2.300 and license also because i need this for lean to created license for aircom V6.1 and 6.2
Please kind me and share to me please
thanks for help me
calvin
2010-07-05, 08:47 PM
Dear All member
Do you have file installation for Sentinel RMS Development Kit V 8.2.2.300 and license also because i need this for lean to created license for aircom V6.1 and 6.2
Please kind me and share to me please
thanks for help me
Wlscgen 8.2 available in the forum is enough for lic generation for enterprise 6.1/6.2.
PM me if you can't find license for ent. 6.1...
Wlscgen 8.2 available in the forum is enough for lic generation for enterprise 6.1/6.2.
PM me if you can't find license for ent. 6.1...
thanks friend for help me
do you have Wlscgen 8.2 can you provide to me please, I check in forum already have but different about VID with AIRCOM, AIRCOM need VID is 473f
but in forum VID is 006A cannot create Lic for AIRCOM
if you have Wlscgen 8.2 VID like 473f can you provide to me please
Thanks
bassem_16
2010-07-06, 03:23 AM
Hello TEMS
This is a lic for Aircom
*B eJhPzEz3i,BVVkoXjLucLi5B4R5Z5u8,Bs8e4MLdHRLylb9:xsi9H:SeF46Qu7MHL97E9qOupCZyhKlUwBbcXwVAEbx1QgSguzEW4l9HkCw,3d# "A1_AIRCOM" version "6", expires Midnight of Dec 4, 2010, exclusive
yazzzing
2010-07-06, 10:38 AM
Hello TEMS
This is a lic for Aircom
*B eJhPzEz3i,BVVkoXjLucLi5B4R5Z5u8,Bs8e4MLdHRLylb9:xsi9H:SeF46Qu7MHL97E9qOupCZyhKlUwBbcXwVAEbx1QgSguzEW4l9HkCw,3d# "A1_AIRCOM" version "6", expires Midnight of Dec 4, 2010, exclusive
this lic is for which version?6.0?or6.1?or 6.2???
thanks a lot!
bassem_16
2010-07-06, 11:41 AM
I believe 6.1, if you have 6.2 try it with also maybe it wil work
I believe 6.1, if you have 6.2 try it with also maybe it wil work
dear friend
for this not full license for AIRCOM can work only AIRCOM but another technology like GSM, UMTS, Wimax...........
thanks
bassem_16
2010-07-06, 12:02 PM
Wlscgen 8.2 for Aircom ;)
Enjoy it
Use my default password :)
Wlscgen 8.2 for Aircom ;)
Enjoy it
Use my default password :)
For this need dongle or not? when i run show need license meter
Please help me
bassem_16
2010-07-06, 12:14 PM
Yes, I dont actually deal with the undongled version :)
I prefer the other way around
DSF emu by Toro, when you edit hex in it, it can work with 8.2 ;)
Yes, I dont actually deal with the undongled version :)
I prefer the other way around
DSF emu by Toro, when you edit hex in it, it can work with 8.2 ;)
OK thanks friend
i try DSF emu by Toro and edit hex already cannot work please see picture bellow:
yazzzing
2010-07-06, 02:01 PM
OK thanks friend
i try DSF emu by Toro and edit hex already cannot work please see picture bellow:
this is ssp emu not dsf emu.....
gokilaravee
2010-07-06, 04:51 PM
how to hardcode DSF emulator?any idea...
this is ssp emu not dsf emu.....
do you have DSF emulator please share
gokilaravee
2010-07-06, 05:50 PM
it is already here...
bassem_16
2010-07-06, 06:05 PM
@ TEMS,
http://www.finetopix.com/showthread.php?t=7988
it was your topic :)
@ TEMS,
http://www.finetopix.com/showthread.php?t=7988it was your topic :)
For this post by me can support with Sentinel RMS Development Kit V 8.2.2.300 or not, but i try already cannot use
do you have another way please help me
bassem_16
2010-07-06, 06:16 PM
this is the DSF emu by toro, you can use a monitor to view it then dump it and convert it to reg file then edit this reg to make it work with 8.2
this is the DSF emu by toro, you can use a monitor to view it then dump it and convert it to reg file then edit this reg to make it work with 8.2
How to do friend , you can send to me please
this is the DSF emu by toro, you can use a monitor to view it then dump it and convert it to reg file then edit this reg to make it work with 8.2
I try already with this and can get like please see below :
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ru-board\gamebit0\Dump\A8700000]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="Dump A870"
"CellType"=hex:\
01,01,03,03,03,03,03,03,00,00,00,00,03,03,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
03,00,00,00,00,00,00,00,03,00,00,00,03,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"sntMemory"=hex:\
9A,01,70,A8,00,00,00,00,08,00,00,00,CA,70,00,00,\
FF,FF,FF,FF,00,00,FF,FF,14,F2,D2,E1,00,00,00,08,\
00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,77,ED,00,00,00,00,FF,FF,00,00,E8,0F,00,00,\
00,00,E6,EE,00,00,00,00,00,00,89,FB,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
but cannot run Wlscgen 8.2 to create license, do you have another way please help me
gokilaravee
2010-07-06, 08:14 PM
wat is the error msg u r getting and post screen shot of the same...
coz..ur reg file is not full,u have missed some cells
wat is the error msg u r getting and post screen shot of the same...
coz..ur reg file is not full,u have missed some cells
Dear friend
When i connect reg file with usb port the software can run but when i created license cannot, show message don't have attach dongle i USB port
Please see about picture below:
do you have another reg file can support with this or not ?
Pl help me and share to me please
angelpy
2010-07-06, 10:05 PM
Dear Masters
This is the error msg when try generate license code with DSF Emulator
This emulator have errors, for that reason we used the emulator SSP.
Any suggestions?
Angelpy
Dear Masters
This is the error msg when try generate license code with DSF Emulator
This emulator have errors, for that reason we used the emulator SSP.
Any suggestions?
Angelpy
thanks friend
but i use with TORO_SSP_Emul_1.7 already but cannot use show massage below:
gokilaravee
2010-07-06, 10:34 PM
change ur reg file for multikey as per example reg in multikey folder..use multikey 18.0.3 and let me know results
change ur reg file for multikey as per example reg in multikey folder..use multikey 18.0.3 and let me know results
Dear friend
for this way i change to use with MultiKey already but cannot work please see reg file below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\A8700000]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="Dump A870"
"CellType"=hex:\
01,01,03,03,03,03,03,03,00,00,00,00,03,03,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
03,00,00,00,00,00,00,00,03,00,00,00,03,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"sntMemory"=hex:\
9A,01,70,A8,00,00,00,00,08,00,00,00,CA,70,00,00,\
FF,FF,FF,FF,00,00,FF,FF,14,F2,D2,E1,00,00,00,08,\
00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,77,ED,00,00,00,00,FF,FF,00,00,E8,0F,00,00,\
00,00,E6,EE,00,00,00,00,00,00,89,FB,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
do you have another way or not?
radio_network
2010-07-06, 11:14 PM
Yes, I dont actually deal with the undongled version :)
I prefer the other way around
DSF emu by Toro, when you edit hex in it, it can work with 8.2 ;)
How to hard core the vendor id in 8.2. i tried a lot form the tutorial aleady posted. Help.
angelpy
2010-07-06, 11:15 PM
Hi TEMS!
The Toro SSP_Emul not work with wlscgen v8.2!, i understand that the wlcgen v8.2 have other memory address.
I try with DSF Emulator and run the wlscgen, but cannot generate license code. The error msg is: error accessing in License Key Meter!
thanks friend
but i use with TORO_SSP_Emul_1.7 already but cannot use show massage below:
How to hard core the vendor id in 8.2. i tried a lot form the tutorial aleady posted. Help.
this one me also cannot know about vendor id in 8.2
yazzzing
2010-07-07, 10:07 AM
How to hard core the vendor id in 8.2. i tried a lot form the tutorial aleady posted. Help.
now the biggest question is the wlscgen.exe ver 8.2 can't make lic.....if you can make lic ,then we try to hard core the vid...
yazzzing
2010-07-07, 10:18 AM
Dear friend
for this way i change to use with MultiKey already but cannot work please see reg file below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\A8700000]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="Dump A870"
"CellType"=hex:\
01,01,03,03,03,03,03,03,00,00,00,00,03,03,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
03,00,00,00,00,00,00,00,03,00,00,00,03,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"sntMemory"=hex:\
9A,01,70,A8,00,00,00,00,08,00,00,00,CA,70,00,00,\
FF,FF,FF,FF,00,00,FF,FF,14,F2,D2,E1,00,00,00,08,\
00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,77,ED,00,00,00,00,FF,FF,00,00,E8,0F,00,00,\
00,00,E6,EE,00,00,00,00,00,00,89,FB,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
do you have another way or not?
how to do this reg?
use dongle monitor for sentinel superpro 1.7 to monitor and dump?
then use what software to convert dump file to reg file?
can you teach me?
thanks a lot!
calvin
2010-07-07, 03:38 PM
how to do this reg?
use dongle monitor for sentinel superpro 1.7 to monitor and dump?
then use what software to convert dump file to reg file?
can you teach me?
thanks a lot!
Use PVA dumper to dump the dongle and then use dmp2mkey to make the reg.
yazzzing
2010-07-08, 11:03 AM
Use PVA dumper to dump the dongle and then use dmp2mkey to make the reg.
I use pva dumper it ,then use dmp2mkey make the reg.
then use vusbus to emulate...but still the same question:I can run
the wlscgen.exe,but when make lic,it say no meter.....
so how to edit the reg file to deal this problem?
thanks for you reply !
yazzzing
2010-07-08, 11:09 AM
Use PVA dumper to dump the dongle and then use dmp2mkey to make the reg.
Am I use a wrong emulator?
use which emulator can make lic?or need edit the reg file?
yazzzing
2010-07-08, 01:11 PM
Use PVA dumper to dump the dongle and then use dmp2mkey to make the reg.
I used DSF toro emu,then I can run wlscgen.exe but can't make lic file.So I use PVA 3.3 to dump,then I use dmp2mkey 2.3 to convert dump file to reg file.then I import the reg file to registry,after that use multikey 18.2.3 to emu,system find superpro dongle and install driver,but finally the wlscgen.exe still can't run.why?I use sentinel dirver ver 7.6.1,under win xp sp2.
so what did I wrong?
gokilaravee
2010-07-08, 02:06 PM
change vendor id..
yazzzing
2010-07-08, 04:00 PM
I see!!!
use multikey 18.0.3 is good,if use 18.2.3,need change some CellType id.
and the real question is ..... the WP is wrong.......
when you correct it,it will work and can make lic file.......
hahaha....
thanks everybody help me......
yazzzing
2010-07-08, 04:03 PM
change vendor id..
to run no need to change vid...
cooltyger
2010-07-08, 06:56 PM
@TEMs
I can suggest atleast about the license meter error. I had faced the same.
Scan your PC for any other emulator running parallely. U need to make sure that only one emulator like the MK18 is running. Then the wlsgn will run without meter error. :p
@others- Regarding change of VID(in undongled) even I am also searching/looking for a new tutorial for 8.2. Any suggestions pls help. :time:
BRs
CT
ali56s
2010-07-11, 05:00 PM
i can run program with emul
but ican not gen license
plz help me for setting wlsgen
i nee it for genert aircom license
BR
ali56s
2010-07-11, 06:13 PM
Wlscgen 8.2 for Aircom ;)
Enjoy it
Use my default password :)
i run it
and
give me error:
bassem_16
2010-07-11, 06:34 PM
@ ali56s
What emu are you using ?
btw if anyone asking for Aircom materials, you can check in here
http://www.***********.com/forumdisplay.php?5-Aircom
yazzzing
2010-07-12, 12:07 AM
i can run program with emul
but ican not gen license
plz help me for setting wlsgen
i nee it for genert aircom license
BR
why my wlscgen.exe ver 8.2.1.5 can't show version information?can you share you wlscgen.exe ver 8.2.1.5?r u wlscgen.exe is original version of wlscgen.exe of 8.2.1.5. have unpacked ?
ali56s
2010-07-14, 12:13 AM
anybody have wlscgen 8.2.2.300?
plz share
angelpy
2010-07-14, 12:37 AM
Hi ali56
I send for you a PM,
My question is, what emulator is used for you?
BR
Angelpy
anybody have wlscgen 8.2.2.300?
plz share
ali56s
2010-07-14, 12:46 AM
hi my friendS IN THE FORUMS do you have wlscgen 8.2.2.300?
do you have vendor id for aircom 6.2?
do you know which version wlscgen working with aircom 6.2?
BR
ali56s
2010-07-14, 10:56 PM
plz help me for config step 1-2-3 for aircom
BR FOR ALL
plz help me for config step 1-2-3 for aircom
BR FOR ALL
for your software can you check on the VID first can support with with VID AIRCOM or not?
if can I can told you about some information for make license AIRcom
yazzzing
2010-07-15, 09:47 AM
for your software can you check on the VID first can support with with VID AIRCOM or not?
if can I can told you about some information for make license AIRcom
VID can be changed by using odby.....I have try.....
VID can be changed by using odby.....I have try.....
please share idea friend how to change VID for Wlscgen 8.2 in OllyDbg
Please help
yazzzing
2010-07-15, 06:42 PM
please share idea friend how to change VID for Wlscgen 8.2 in OllyDbg
Please help
what VID do you want?I can make wlscgen.exe for you!
it is hard to explain how to calclator....
what VID do you want?I can make wlscgen.exe for you!
it is hard to explain how to calclator....
please help me to create wlscgen.exe can support the VID bellow:
-4163 and 4eb7
thanks for help
yazzzing
2010-07-19, 10:12 AM
Sorry I am to busy these day,I will do the wlscgen.exe few days later in this week,just wait for a while.....sorry
yazzzing
2010-07-22, 10:49 AM
please help me to create wlscgen.exe can support the VID bellow:
-4163 and 4eb7
thanks for help
this is wlscgen.exe 8.2.1.500 vid 4163 and 4eb7 and 473f,download and test it.....pm me for password...
if you like,please add my rep,thanks a lot!
008348
2010-07-22, 11:37 AM
@yazzzing,
Thanks for your work.
Can you remove dongled?
this is wlscgen.exe 8.2.1.500 vid 4163 and 4eb7 and 473f,download and test it.....pm me for password...
if you like,please add my rep,thanks a lot!
yazzzing
2010-07-22, 12:42 PM
this is wlscgen for 40a3.....the same password.......
if you like it,please add my rep,thanks a lot!
gokilaravee
2010-07-22, 12:59 PM
wat is mean by unpacked????
original file size is 1.30MB but this is 1.46MB
wat is the difference..tool is working fine.Thnks
008348
2010-07-22, 01:08 PM
wat is mean by unpacked????
original file size is 1.30MB but this is 1.46MB
wat is the difference..tool is working fine.Thnks
Yes the 1.46MB wlscgen8.2 is unpacked.
You can unpack it following the tutorial of zhgong007.
gokilaravee
2010-07-22, 01:10 PM
thnks..now we can follow zhongg tut abt hardcoding vendor ID with tool.
uel888
2010-07-23, 09:11 AM
@yazzzing
can you share with us the how to edit the reg file based on the corresponding VID? Im using the multikey 18.0.3 not to complicate some celltype change.
If possible share the working reg file, I got gokilaravee (http://www.finetopix.com/member.php?u=6555) reg A870 but still not run.
Thanks
I see!!!
use multikey 18.0.3 is good,if use 18.2.3,need change some CellType id.
and the real question is ..... the WP is wrong.......
when you correct it,it will work and can make lic file.......
hahaha....
thanks everybody help me......
008348
2010-07-23, 09:42 AM
You can hardcoding vendor ID with tool without unpacking wlscgen.exe follow my tutorial.
link is: http://www.finetopix.com/showthread.php?t=11187
yazzzing
2010-07-29, 09:46 AM
@yazzzing
can you share with us the how to edit the reg file based on the corresponding VID? Im using the multikey 18.0.3 not to complicate some celltype change.
If possible share the working reg file, I got gokilaravee (http://www.finetopix.com/member.php?u=6555) reg A870 but still not run.
Thanks
someone have share the reg file to emu the wlscgen.exe in the forum...
yogi_saw
2010-07-29, 01:40 PM
@yazzzing u have seen and downloded the reg file provided by me is it not working ?
yazzzing
2010-07-30, 10:24 AM
@yazzzing u have seen and downloded the reg file provided by me is it not working ?
it work very good,you use pva 3.3 and dmp2mkey or use SafeDump128 and dmp2mkey to make reg?I use pva 3.3 and my reg is different with your reg file.
ugyenkp
2011-05-09, 07:56 PM
Please send me password
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.