View Full Version : Question E******* BTS (combine two chgr from different TG)
jieyens99
2010-06-22, 10:42 AM
hi experts,
good day...
Question... this is the scenario(E******* GSM)...
Cell= 0001A (TG1 for 1st Cabinet and TG2 2nd Cabinet)
TG 1 = chgr0 and chgr1
TG 2 = chgr2
can i combine chgr1 and chgr2 from different TG?
hoping for your enlightenment on this.
thank you very much...:):)
electron
2010-06-24, 12:04 AM
hi experts,
good day...
Question... this is the scenario(E******* GSM)...
Cell= 0001A (TG1 for 1st Cabinet and TG2 2nd Cabinet)
TG 1 = chgr0 and chgr1
TG 2 = chgr2
can i combine chgr1 and chgr2 from different TG?
hoping for your enlightenment on this.
thank you very much...:):)
Hi,
Yes, it is possible you should activate TG Synchronization feature in BSC level
Regards,
jieyens99
2010-06-25, 12:05 AM
thank you very much sir....
is there feature readily available in the BSC or Operator need additional payment for this feature?
zee86
2010-06-26, 10:48 PM
operator pay for this
thank you very much sir....
is there feature readily available in the BSC or Operator need additional payment for this feature?
jieyens99
2010-06-27, 12:10 AM
ok sir, thanks...
follow up question... is there other way i can do this without activating TG synchronization feature?
electron
2010-06-27, 12:27 AM
As i know it is not possible. If you find any other standard-less solution you will increase CDR.
Thanks,
Reza
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.