Genex - Assistant 3.3 source !!

[Weiland86]

Hi Nale,

It seems that ******** only works for older assistant v3.3 versions... if you have a new ******** file for the newer versions please shared... actually the error that assiatnt shows is that the license has already expired.

Thank you in Advance very nice contribution

[Denilson Martins]

The file is unable for download. Could you up again the user guide V300R003?

[KidAngel]

Hi,

I was try PROBE_V3.5_FIXED_MED_v2.rar it not working. There is nothing after Probe welcome screen popup.

Hi all...free for all and no password, med for Assistant 3.3, Assistant v3.5 and Probe 3.5 (it might work with older versions, just try it and post results)
Dont need emulator Sentemul anymore.
Works on W7 x32 and x64 Replace original GenexLicense.dll in BIN folder with provided one.
Notice dll are not the same for Assistant and Probe. Use correct one.
** Please report any bug or problem. **

UPDATE 1: Fixed Probe med bug for "License Timer Check"

UPDATE 2: Same cra__cked dll for ASSISTANT v3.3 works with "PSTN SQE Server" tool in PROBE v3.5, just replace original dll in "PSTN SQE Server" folder inside PROBE installation folder using the fixed dll for ASSISTANT (not the Probe one).

UPDATE 3: Added med for ASSISTANT v3.5

UPDATE 4: I need med for JDSU NIXT v16.x Please someone can share?

UPDATE 5: Assitant v3.5 installer here: http://www.4shared.com/rar/Pxogt1hZ/...005C00_in.html

UPDATE 6: 4SHARED links... pls add rep and thanks

http://www.4shared.com/rar/pgg_SXb8/...ED_MED_v2.html
http://www.4shared.com/rar/gWlVcZTr/...exLicense.html
http://www.4shared.com/rar/5vaAfGyI/...exLicense.html

[Osman Nayeem]

Dear Nale,

It works fine with Probe 2.3, but shows following error messages for Probe 3.5. Please help.

Capture1.JPG

Capture2.JPG


BR//Osman

[jalilou]

Hi,

could someone upload the med files again , because 4shared links are not working please

many thanks.

[softice32]

Dear expert,

how to connect genex probe to UE/MS, are UE/MS need special firmware or activation? need information please

thanks

[nale]

Dear expert,

how to connect genex probe to UE/MS, are UE/MS need special firmware or activation? need information please

thanks

Some brands needs special firmware and is expensive like Nokia, but almost any commercial phone you can buy in stores with Qualcomm chipset should work for drive test (either Probe, TEMS, Nemo, etc), you just must be sure that:

1- Its Qualcomm chipset based (check your phone here for this information http://pdadb.net) examples are: Samsung GT-i9515L, GT-i9505, SPH-L720T, SGH-i337M, HTC Butterfly S 9088, etc. Any Qualcomm chipset model will do it, as long it is Qualcomm....

2- You must enable Diagnostics COM Port on the phone. This depends on model and brand, but you should be able to find specific instructions for your model (Google) for example, try codes like *#7284# or *#0808# etc. A good source to find instructions on how to enable Diagnostics port in SAMSUNG phones is to download this unlock tool http://sam.123unlock.nl/index.php?page=download . This is for SIM unlocking, but as part of the instructions, they tell you how to enable required ports. (if you also need to unlock your phone, then buy credits and do it with this very tool)

3- You must have valid license in TEMS, NEMO or Probe.

Hope this helps

[ayman.absi]

This installer working fine with nale's solution:
GENEX_Assistant_V300R005C00SPC

Hi all...free for all and no password, med for Assistant 3.3, Assistant v3.5 and Probe 3.5 (it might work with older versions, just try it and post results)
Dont need emulator Sentemul anymore.
Works on W7 x32 and x64 Replace original GenexLicense.dll in BIN folder with provided one.
Notice dll are not the same for Assistant and Probe. Use correct one.
** Please report any bug or problem. **

UPDATE 1: Fixed Probe med bug for "License Timer Check"

UPDATE 2: Same cra__cked dll for ASSISTANT v3.3 works with "PSTN SQE Server" tool in PROBE v3.5, just replace original dll in "PSTN SQE Server" folder inside PROBE installation folder using the fixed dll for ASSISTANT (not the Probe one).

UPDATE 3: Added med for ASSISTANT v3.5

UPDATE 4: I need med for JDSU NIXT v16.x Please someone can share?

UPDATE 5: Assitant v3.5 installer here: http://www.4shared.com/rar/Pxogt1hZ/...005C00_in.html

UPDATE 6: 4SHARED links... pls add rep and thanks

http://www.4shared.com/rar/pgg_SXb8/...ED_MED_v2.html
http://www.4shared.com/rar/gWlVcZTr/...exLicense.html
http://www.4shared.com/rar/5vaAfGyI/...exLicense.html

[nron3]

i also have license verify fail///
any suggestion/ thank

[Cepillo]

Does it support trp logfile? if no, how can I convert it to gen log file?