Thanks Thanks:  6
Showing results 1 to 3 of 3

Thread: IMEI - A2 empty board programming

  1. #1
    Member Reputation: 181
    Join Date
    2007-09-16
    Posts
    641


    Default IMEI - A2 empty board programming

    First , I would like to thanks gblues for his post.

    I save this in pdf file. Maybe this is the only solution for OTP A2 IMEI change.

    If you have some question then you can ask the author(gblues) and look for his thread.
    Attached Files Attached Files

  2. Thanks rezas thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Member Reputation: 142
    Join Date
    2007-07-01
    Posts
    147


    Default Re: IMEI - A2 empty board programming

    otp chip in a2 tems model is glued with hard transparent glue which won't melt even with 450 degrees heat, you will fry the board instead.
    and it is NOT an easy job even for technician with more than 10 years experience in mobile hardware repairing, the risk of killing the mobile is too big.
    well, i've succeeded though, with lot of sweat in air-conned room

  5. Thanks rezas thanked for this post
  6. #3
    Member Reputation: 694
    Join Date
    2007-11-21
    Posts
    389


    Default Re: IMEI - A2 empty board programming

    Not easy remove glue & chips from board....can be destroy board
    to put New IC is very hard, unless 10 chipset for 1 phone if board not damage

    btw many shop selling IC AB3100 , not hard to get this chips
    (default password = "topixfine")

  7. Thanks rezas thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •