-
Junior Member
Reputation: 10
hsdpa users in cell in Node B
Hi Friends,
Pls can you help to send moshell commands to " Check number of hsdpa users in particular cell in Node B "
Rgds,
prem
-
2012-05-30 06:33 PM
# ADS
Circuit advertisement
-
Member
Reputation: 42
Re: hsdpa users in cell in Node B
Hi,
command for RNC
> ced -r <Iub name>
Printout format:
---------------------------------------------------------------------------------------------------------------------------------------------
MOD CELL cid fro ro PwrDl/Adm dlCode ulInt sf8d sf8u sf16d sf16u sf32d sf4u dlASE ulASE HScnt EULs EULns CPMcnt CC_SP
---------------------------------------------------------------------------------------------------------------------------------------------
1 Iub-1-1 1031 0 0 7.0% 75% 6.2% -111.8 0/8 0/8 0/16 0/16 0/32 0/4 0/500 0/500 0/10 1/32 0/100 0/15 1:0019sp1
1 Iub-1-2 1032 1 2 7.0% 75% 6.2% -111.8 0/8 0/8 0/16 0/16 0/32 0/4 0/500 0/500 0/10 4/32 0/100 0/15 1:0021sp1
1 Iub-1-3 1033 2 3 7.0% 75% 22.9% -111.8 1/8 0/8 0/16 1/16 0/32 0/4 39/500 8/500 0/10 3/32 0/100 0/15 1:0019sp1
1 Iub-2-1 1037 6 1 7.0% 75% 24.6% -111.8 1/8 0/8 0/16 2/16 1/32 0/4 53/500 20/500 0/10 0/32 0/100 0/15 1:0019sp1
1 Iub-2-2 1038 7 4 7.0% 75% 10.8% -111.8 0/8 0/8 0/16 2/16 1/32 0/4 12/500 19/500 1/10 0/32 0/100 0/15 8:0023sp1
HScnt: HSDPA UE Count / hsdpaUsersAdm
-
Junior Member
Reputation: 10
Re: hsdpa users in cell in Node B
thanks,such as EUL2ms.etc are all useful to anlyze question.and moshell tool is good than emas.
Last edited by conall; 2012-05-31 at 04:15 PM
-
Junior Member
Reputation: 10
Re: hsdpa users in cell in Node B
Thank you. We can't check from Node B side?
-
Member
Reputation: 92
Re: hsdpa users in cell in Node B
actually i found that ce command doesn't give real time status...
i use "uer -c cell_name" it gives you an printout of all ongoing traffic in a cell, and HS traffic is marked as HS/EUL, while cs traffic is marked as voice 12,2 amr.
hop it helps
-
Junior Member
Reputation: 10
Re: hsdpa users in cell in Node B
Ya..its true but we can't get voice call commmand like " get radio no " for hsdpa also?
-
Member
Reputation: 42
Re: hsdpa users in cell in Node B
Originally Posted by
GrayDog
Hi,
command for RNC
> ced -r <Iub name>
Printout format:
---------------------------------------------------------------------------------------------------------------------------------------------
MOD CELL cid fro ro PwrDl/Adm dlCode ulInt sf8d sf8u sf16d sf16u sf32d sf4u dlASE ulASE HScnt EULs EULns CPMcnt CC_SP
---------------------------------------------------------------------------------------------------------------------------------------------
1 Iub-1-1 1031 0 0 7.0% 75% 6.2% -111.8 0/8 0/8 0/16 0/16 0/32 0/4 0/500 0/500 0/10 1/32 0/100 0/15 1:0019sp1
1 Iub-1-2 1032 1 2 7.0% 75% 6.2% -111.8 0/8 0/8 0/16 0/16 0/32 0/4 0/500 0/500 0/10 4/32 0/100 0/15 1:0021sp1
1 Iub-1-3 1033 2 3 7.0% 75% 22.9% -111.8 1/8 0/8 0/16 1/16 0/32 0/4 39/500 8/500 0/10 3/32 0/100 0/15 1:0019sp1
1 Iub-2-1 1037 6 1 7.0% 75% 24.6% -111.8 1/8 0/8 0/16 2/16 1/32 0/4 53/500 20/500 0/10 0/32 0/100 0/15 1:0019sp1
1 Iub-2-2 1038 7 4 7.0% 75% 10.8% -111.8 0/8 0/8 0/16 2/16 1/32 0/4 12/500 19/500 1/10 0/32 0/100 0/15 8:0023sp1
HScnt: HSDPA UE Count / hsdpaUsersAdm
to refresh the data is better to use the command
> cedr -r <Iub name>
- "r": re-read the data, otherwise, cached data is re-parsed.
-
Junior Member
Reputation: 10
Re: hsdpa users in cell in Node B
thanks and i can see the users
-
Re: hsdpa users in cell in Node B
You can also check the number of HS users using statistical counters:
####################################################################################################################################
MO Class Pm Counter Type Flags
####################################################################################################################################
HsDschResources pmCapacityHsDschUsers sequence:long [21] PDF,ropReset
------------------------------------------------------------------------------------------------------------------------------------
The distribution of the number of HS-DSCH users, as percentages of the corresponding license limit.
Counter type: PDF
Counter is reset after measurement interval: Yes
Condition: Sampled each second of the granularity period (gives 900 values). The actual measurement is started when the HS-DSCH resources are setup.
PDF ranges:
[0]: License limit (license key value if valid license key, else default value of RbsLocalCell::maxNumHsdpaUsers if invalid/missing license key, else max value of RbsLoca
lCell::maxNumHsdpaUsers if emergency unlock is active)
[1]: Number of sampled values in range [0..5[ %
[2]: Number of sampled values in range [5..10[ %
[3]: Number of sampled values in range [10..15[ %
[4]: Number of sampled values in range [15..20[ %
[5]: Number of sampled values in range [20..25[ %
[6]: Number of sampled values in range [25..30[ %
[7]: Number of sampled values in range [30..35[ %
[8]: Number of sampled values in range [35..40[ %
[9]: Number of sampled values in range [40..45[ %
[10]: Number of sampled values in range [45..50[ %
[11]: Number of sampled values in range [50..55[ %
[12]: Number of sampled values in range [55..60[ %
[13]: Number of sampled values in range [60..65[ %
[14]: Number of sampled values in range [65..70[ %
[15]: Number of sampled values in range [70..75[ %
[16]: Number of sampled values in range [75..80[ %
[17]: Number of sampled values in range [80..85[ %
[18]: Number of sampled values in range [85..90[ %
[19]: Number of sampled values in range [90..95[ %
[20]: Number of sampled values >= 95 %
Undefined value: -1
MaxLength=21
************************************************************************************************************************************
Use pget . pmCapacityHsDschUsers to print the value of the counter for the last ROP.
Last edited by Evghenii; 2012-06-18 at 08:09 PM
-
Member
Reputation: 92
Re: hsdpa users in cell in Node B
Originally Posted by
prem19809
Ya..its true but we can't get voice call commmand like " get radio no " for hsdpa also?
"Get radiolinks noofradilinks" gives you exactly what it says, number of users on a cell, this includes HSDPA/PS and CS users...
Bookmarks