-
Senior Member
Reputation: 740
How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Hi
Does anybody have a detailed procedure on how to configure Nemo Outdoor ver 8 with Scanner and Samsung S8.
Is NMR must for samsung S8? Is Nemo Handy must?
How can I confirm that the Samsung S8 I have has all the pre-reqs to work with nemo outdoor?
What drivers are needed, how to configure COM ports etc. I am looking for someone who can walk me through.
Also same question for Scanner configuration, has anybody connected JDSU Scanner?
Procedure Please.
-
2018-08-21 08:04 AM
# ADS
Circuit advertisement
-
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
check attached file to download device-connection guide from NEMO
https://mega.nz/#!SAoUFQJJ!ekf-1eb7L...fzzyiYP_Q-rgpw
And no JDSU scanner found in device list
NMR in using to reduce the CPU loading to prevent that high CPU loading impact performance when you connect multi UEs to one laptop, and some special test like MOS must use NMR
-
Senior Member
Reputation: 740
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Thankyou so much.
2 further questions:
1. Do you have latest version of these documents.
2. Do you also have the scanner configuration guide similar to device configuration guide.
-
Member
Reputation: 35
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
you can flash the JDSU scanner to "Venture MRX 3808A-L", then can use Nemo outdoor
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 609
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Originally Posted by
crisnspro
you can flash the JDSU scanner to "Venture MRX 3808A-L", then can use Nemo outdoor
I have jdsu w1314b scanner.could you pls share the firmware
-
Post Thanks - 1 Thanks
-
VIP Member
Reputation: 1852
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
thanks for the info. both look similar.
http://www.v-comms.com/mrx3808al.html
also has jdsu w1314a and interesting what models can convert ))
-
Member
Reputation: 35
1 out of 1 members found this post helpful.
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
only the factory has it, we have no, any way, JDSU already give up the scanner for 2 years, also the MRX scanner no people use it since its poor performance.
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 609
1 out of 1 members found this post helpful.
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Nemo outdoor v8.0 supports JDSU Scanner in their hardware list. But my W1314A is not getting detected.Any particular firmware needed for this?
Sorry it is working after reinstalling driver.Really wonder how they have added this age old scanner anyways good for me.
Last edited by techfolkcmr; 2018-11-27 at 12:12 AM
Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 10
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Originally Posted by
techfolkcmr
Nemo outdoor v8.0 supports JDSU Scanner in their hardware list. But my W1314A is not getting detected.Any particular firmware needed for this?
Sorry it is working after reinstalling driver.Really wonder how they have added this age old scanner anyways good for me.
What drivers did you install? My W1314B is also not detectable.
-
Member
Reputation: 16
Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor
Originally Posted by
optron
What drivers did you install? My W1314B is also not detectable.
if confirm drivers is installed
plz check nemo feature
Bookmarks