-
Junior Member
Reputation: 11
1 out of 1 members found this post helpful.
******** MTM 5400 erased the flash memory head
Restore the MTM 5400 . Not an experienced user has erased the flash memory head. Need Codeplug . MR.10.2 R14.000.91 PMWN4014A . Please help,the service center is too far and expensive for me. sorry for bad English.
Last edited by us6iew; 2017-11-23 at 08:55 PM
-
2017-11-23 08:51 PM
# ADS
Circuit advertisement
-
Junior Member
Reputation: 9
Re: ******** MTM 5400 erased the flash memory head
Originally Posted by
us6iew
Restore the MTM 5400 . Not an experienced user has erased the flash memory head. Need Codeplug . MR.10.2 R14.000.91 PMWN4014A . Please help,the service center is too far and expensive for me. sorry for bad English.
MR.10.2 R14.000.91??? Frequency Band?
-
Junior Member
Reputation: 11
Re: ******** MTM 5400 erased the flash memory head
sorry, MR10.2 R14.000.7791/7328 Band 380-430 mhz
-
Junior Member
Reputation: 9
Re: ******** MTM 5400 erased the flash memory head
Originally Posted by
us6iew
sorry, MR10.2 R14.000.7791/7328 Band 380-430 mhz
Sorry, did not find MR10.2
Last edited by bbqn; 2017-11-24 at 02:51 AM
-
Junior Member
Reputation: 11
Re: ******** MTM 5400 erased the flash memory head
Originally Posted by
bbqn
Sorry, did not find MR10.2
https://mega.nz/#!RmAUQIqR!WPqKnDhrl...yahCFqh7Snnwl4 View please I need this file so I can upload to flash memory or am I mistaken ?
-
Junior Member
Reputation: 11
Re: ******** MTM 5400 erased the flash memory head
How can I connect to the flash memory of the control panel (head) without a USB cable? flash memory is empty, CPS does not work via USB cable
-
Junior Member
Reputation: 11
Re: ******** MTM 5400 erased the flash memory head
If I connect the control panel via the RS232 interface will help?
-
Junior Member
Reputation: 13
Re: ******** MTM 5400 erased the flash memory head
You will need the upstart files and the rs232 cable as well as the CPS Depot.
If I'm not mistaken there are three videos of this procedure on youtube, which in the third one was successful in the restoration. Good luck!
The cable model: PMKN4105A
Last edited by RicardoNit; 2017-11-28 at 06:08 AM
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 11
Re: ******** MTM 5400 erased the flash memory head
Now everything is clear , the video I found , thank you!
-
Member
Reputation: 62
Re: ******** MTM 5400 erased the flash memory head
RicardoNit
I am not sure that the CH firmware could be reflashed via the brick accessory socket. Usually the CH is accessible via USB on the CH only.
-
Post Thanks - 1 Thanks
Bookmarks