-
Member
Reputation: 40
Atoll 3.1 Problem Electrical down tilt
Hi expert,if any body have solution for electrical down tilt in atoll version 3.xxx not active(the button for up tilt and downtilt not active) why?my friend use atoll 2.8 and electrical down till active with same antenna type...
-
2014-02-25 09:58 PM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 2737
1 out of 1 members found this post helpful.
Re: Atoll 3.1 Problem Electrical down tilt
This information field. You must use a separate pattern of the antenna for each electrical tilt.
Making the Antenna Additional Electrical Downtilt Accessible
By default, Atoll does not allow modification of the Additional Electrical Downtilt for transmitters, station templates,
repeaters, and remote antennas. To make this parameter accessible in the GUI, add the following lines in the Atoll.ini file:
[Antenna]
REDTDisplay = 1
REDTDisplay is set to 0 by default.
Bookmarks