-
Member
Reputation: 220
3 out of 3 members found this post helpful.
Magic Solution for improving TBF success rate
Hello,
In our Network we suffer from a bad TBF success rate ("Ms no response"), after a deep investigation Huawei recomand us to deactivate the "Flex HSN", and fortunately we had a very good result after this actions (we did it in many BSC with an improvement of the TBF success rate).
But we have some question, What can be the impact of that change in our network? what we have to verify in order to say that this feature doesn't serve to any things?
...
Last edited by gogotchiya83; 2012-06-02 at 12:56 AM
-
2012-06-02 12:37 AM
# ADS
Circuit advertisement
-
Re: Magic Solution for improving TBF success rate
i will try it on one of our BSCs to see the result .. thanks
-
Member
Reputation: 140
1 out of 1 members found this post helpful.
Re: Magic Solution for improving TBF success rate
we also have good improvement after disabling "PS_DTX" parameter.
-
Member
Reputation: 220
Re: Magic Solution for improving TBF success rate
Dear Expert, How do you find the value of SD Drop lower than 0,01% for the whole network?
What is the logical value? i was with other operator and we have 0,5%,...
-
Member
Reputation: 140
Re: Magic Solution for improving TBF success rate
untitled.jpg
As u can see Failed TBF establishment due to MS no response has highly increased after enabling PS_DTX feature on 1st october and after disabling it is decreasing from 18th october
-
Member
Reputation: 253
Re: Magic Solution for improving TBF success rate
@Amit,
What type of BSC are you referring to?BSC32,6000,6900,etc?
regards//
-
Member
Reputation: 140
Re: Magic Solution for improving TBF success rate
Originally Posted by
kevin_h811
@Amit,
What type of BSC are you referring to?BSC32,6000,6900,etc?
regards//
6900; i think this is a new feature only with 6900
-
Senior Member
Reputation: 331
Re: Magic Solution for improving TBF success rate
Originally Posted by
Amit.Kumar
6900; i think this is a new feature only with 6900
what is the parameter name for it in BSC6900? i didnt find "PS_DTX"
thanks
-
Member
Reputation: 140
Re: Magic Solution for improving TBF success rate
Originally Posted by
dacoder
what is the parameter name for it in BSC6900? i didnt find "PS_DTX"
thanks
MO |
Parameter ID |
Parameter Name |
NE |
GCELLPRIVATEOPTPARA |
PSDTX |
PS DTX |
BSC6900 |
-
Senior Member
Reputation: 331
Re: Magic Solution for improving TBF success rate
Originally Posted by
Amit.Kumar
MO |
Parameter ID |
Parameter Name |
NE |
GCELLPRIVATEOPTPARA |
PSDTX |
PS DTX |
BSC6900 |
i found that its only available in V900R013 onwards... any idea of similar parameter for V900R011. We are facing low TBF success rate in our network.
thanks
Bookmarks