Hi Imran;
Thanks , but can you let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******
T305 + 2*T308 < (N200+1)*T200[/QUOTE]
Hi Imran;
Thanks , but can you let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******
T305 + 2*T308 < (N200+1)*T200[/QUOTE]
short the MSC timer T305 and T308, will decrease the TCH DCR, 8 years ago, I tried it, nothing help about customer experience, this is a Chinese "Invention".
U r right crisnspro....it was implemented in ChinaMobile first..but now they have changed it back.....
we implemented with one huawei and one e******* network.......both times.....dcr came crashing down ....but when we explained to the operators how it happened...they reverted it back...and rightly so !!!
Hi All,
As your experienced, After change timer T305 and T308 on core, does it need to soft reset the BSC's ?
Hi, there's no need for that
Dear All;
Thanks , but can you let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******
T305 + 2*T308 < (N200+1)*T200
Gentelmen;
Please your kind support to let me know what are obtimum values for N200 & T200 to achive below equation while set T305 & T308 as low as 1sec.
Noting our vendor is E*******
T305 + 2*T308 < (N200+1)*T200
i am not able to view the attached file
the formula is T305 + 2*T308 > (N200+1)*T200 because with your formula you are hiding some drops especially when you reduce too much the T308.
Bookmarks