Re: How to Plot/Calculate AMR Codec Usage in Actix
Hello,
Did you success to resolve this issue?
i'm triying to do some maping between MOS and Codec in Actix...
Have you some Workbook treating this issue?
Re: How to Plot/Calculate AMR Codec Usage in Actix
I use mostly Nemo Outdoor now and I didn't lose more time on this issue.
BR,
Rooster[BG]
Originally Posted by gogotchiya83
Hello,
Did you success to resolve this issue?
i'm triying to do some maping between MOS and Codec in Actix...
Have you some Workbook treating this issue?
Re: How to Plot/Calculate AMR Codec Usage in Actix
check your drive test logs my friend... if the ue is in idle mode and when in dedicated but not served with bearers there are no amc codec to register in post-processing .. you can check it through right click select workbook then if the ue has bearers it will have amr codec shown in table.
Re: How to Plot/Calculate AMR Codec Usage in Actix
Dear shagahod,
I can't quite get your point.
I'm talking about Actix attributes and what exactly you can see from there.
Showing Speech Codec from Nemo logs is not a problem. Seeing continuously which specific AMR Codec is used is different.
Exports from the logs are another story.
check your drive test logs my friend... if the ue is in idle mode and when in dedicated but not served with bearers there are no amc codec to register in post-processing .. you can check it through right click select workbook then if the ue has bearers it will have amr codec shown in table.
Bookmarks