Thanks Thanks:  0
Showing results 1 to 5 of 5

Thread: How to use Tems_investigation_9.0.3

  1. #1
    Member Reputation: 16
    Join Date
    2010-01-09
    Location
    Dhaka
    Posts
    90


    Default How to use Tems_investigation_9.0.3

    I have installed Tems_investigation_9.0.3 in my laptop(AMD Athlon X2). I am using Sony E******* K800i as MS for GSM drive test. I also installed driver for K800i. First I open Tems_investigation_9.0.3 then I connect K800i and GPS Nokia LD-3W. It shows both MS and GPS are prperly connected.I get GPS co-ordinate properly but I do not get any values like ARFCN,recieve signal values. Can any one help me?

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Member Reputation: 64
    Join Date
    2010-03-25
    Location
    In the air
    Posts
    112


    Default

    Can you tell us in which window you don't see the parameters? Can you post a screenshot?

  4. #3
    Member Reputation: 58
    Join Date
    2009-03-29
    Posts
    98


    Default

    Quote Originally Posted by hinobd View Post
    I have installed Tems_investigation_9.0.3 in my laptop(AMD Athlon X2). I am using Sony E******* K800i as MS for GSM drive test. I also installed driver for K800i. First I open Tems_investigation_9.0.3 then I connect K800i and GPS Nokia LD-3W. It shows both MS and GPS are prperly connected.I get GPS co-ordinate properly but I do not get any values like ARFCN,recieve signal values. Can any one help me?
    select the appropiate GSM windows

  5. #4
    Member Reputation: 144
    Join Date
    2010-11-08
    Location
    virtual world
    Posts
    94


    Default Re: How to use Tems_investigation_9.0.3

    Hi Friend,

    First : Make sure the band serving ( GSM or 3G )
    next go to window TI, If GSM hit presentation next select gsm next select ( what you want to see ) ,(example GSM GSM Serving + Neighbors ) select GSM Serving + Neighbors and in GSM GSM Serving + Neighbors window , press the right mouse button select properties next select Mobile port/number ( example MS1 or MS2 or MS3 see equipment config )
    press apply and ok..... enjoy

    hopefully help you

    Cheers
    Cambaling
    finetopixthebestforum
    Attached Images Attached Images

  6. #5
    Member Reputation: 116
    Join Date
    2008-11-19
    Posts
    103


    Default Re: How to use Tems_investigation_9.0.3

    Maybe your k800 not TEMS?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •