Thanks Thanks:  0
Page 1 of 3 123 LastLast
Showing results 1 to 10 of 26

Thread: Flashing ******** V3xx

  1. #1
    Member Reputation: 261
    Join Date
    2009-08-02
    Location
    Palestine
    Posts
    141


    Lightbulb Flashing ******** V3xx

    Dear Friends,

    Does TEMS or NEMO support ******** Handset V3xx for GSM measurements?
    because as I can see from TEMS 8.03 lic that ******** support only UMTS !!! (See the Pic)

    If it does, I just received FW for V3xx. I didn't try it yet, actually I don't know how to install the FW for ******** handset .
    So if any one interesting for discussion and sharing the knowledge (and the FW) please PM me.
    Attached Images Attached Images

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 463
    Join Date
    2008-05-22
    Posts
    935


    Default

    yes ...

    it can support GSM-UTMS at TEMS & NEMO,
    (correct me if am wrong)


    ask parto_tegal how to flash it ...
    والسلام عليكم ورحمة الله وبركاته & Regards,

    -kaka-

  4. #3
    Member Reputation: 22
    Join Date
    2007-07-08
    Posts
    228


    Default

    I know how to flash a v3xx.

  5. #4
    Member Reputation: 261
    Join Date
    2009-08-02
    Location
    Palestine
    Posts
    141


    Default

    Thanks Kaka

    but do I need lic for GSM !!

    Quote Originally Posted by kaka.enine View Post
    yes ...

    it can support GSM-UTMS at TEMS & NEMO,
    (correct me if am wrong)


    ask parto_tegal how to flash it ...

  6. #5
    Member Reputation: 261
    Join Date
    2009-08-02
    Location
    Palestine
    Posts
    141


    Default

    Interesting

    can u share step-by-step for how to flash it.

    Thanks

    Quote Originally Posted by fmstereo View Post
    I know how to flash a v3xx.

  7. #6
    Member Reputation: 261
    Join Date
    2009-08-02
    Location
    Palestine
    Posts
    141


    Talking

    Ok here u are the Flashing

    http://www.4shared.com/file/13191550...OLA_Flash.html

    you can try it and feed me back with the results.

    for the password PM me

    PW :: Next_Moto_Flashv3xx

    Enjoy
    Last edited by PaleNxtTel; 2009-11-08 at 07:38 AM

  8. #7
    Moderator Reputation: 520
    Join Date
    2008-04-11
    Posts
    431


    Default

    Quote Originally Posted by PaleNxtTel View Post
    Ok here u are the Flashing

    http://www.4shared.com/file/13191550...OLA_Flash.html

    you can try it and feed me back with the results.

    for the password PM me
    It's easier to use FB3:
    http://rapidshare.com/files/262197930/FB3.rar
    No password protected
    Regards
    parto_tegal

  9. #8
    Member Reputation: 261
    Join Date
    2009-08-02
    Location
    Palestine
    Posts
    141


    Default

    Thanks for your advice

    Can u share Step-by-Step for how to flash Moto V3xx


    Quote Originally Posted by parto_tegal View Post
    It's easier to use FB3:
    http://rapidshare.com/files/262197930/FB3.rar
    No password protected
    Regards
    parto_tegal

  10. #9
    Moderator Reputation: 520
    Join Date
    2008-04-11
    Posts
    431


    Default How to make V3xx EFEM Phone

    Dear All...
    I am so sorry, I was too na'if to judge the post of PaleNxtTel is not a good solution, it is actually the best one contains all resource to make your V3xx EFEM Phone...

    Here we go....
    1. Install the fb3.0.7 Software
    2. After finished, run the software and run the keygen, enter name and unlock the F&B.
    3. Install the ********_EU_Driver_Installation and connect your powered- ON V3xx Phone into your computer using Mini USB Cable.
    4. On F&B Software, click Read button and back-up your original FW of your V3xx normal phone, just in case...
    5. Then click Write button and appoint the firmware of 2007-07-16_185609.fb3 and check your normal FW. You need the same FW version with the EFEM Firmware version, it is R26117RK_U_98.50.0ER or the lower...
    6. Then click Write data, wait until finish....

    (I am sorry I have no phone to flash....)

    Have a good luck...
    parto_tegal
    Attached Images Attached Images

  11. #10
    Member Reputation: 48
    Join Date
    2008-04-27
    Posts
    65


    Default

    Have you tried connecting the phone before flashing , TEMS has support for several phones without the need of any special firmware , specially for 3G.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •