-
Junior Member
Reputation: 13
STP8X Radio programing help
Hi,
recently I bought STP8X140 Radio, that I have to program eventually
But I have only RM1.81, and don's see that radio available in it... can I program it with this version?
Thanks.
-
2024-02-15 06:03 PM
# ADS
Circuit advertisement
-
Member
Reputation: 209
Re: STP8X Radio programing help
If the firmware is 10.5-004 or below, then you can use the RM1.
-
Junior Member
Reputation: 13
Re: STP8X Radio programing help
Originally Posted by
580-Gabor
If the firmware is 10.5-004 or below, then you can use the RM1.
How can I check the firmware version?
-
Member
Reputation: 16
Re: STP8X Radio programing help
You can connect the radio station to your computer, then open the "Radio Manager Toolbox" that comes with RM1.81, connect it correctly, select "Information", and wait for the number after the<mainCodeSoftwareVersion>field in the pop-up window to correspond to the corresponding version number. You can send out this string of numbers to see if anyone can parse it (my version number information is up until 2011)
-
Member
Reputation: 17
1 out of 1 members found this post helpful.
Re: STP8X Radio programing help
-
Post Thanks - 1 Thanks
-
Member
Reputation: 209
1 out of 1 members found this post helpful.
Re: STP8X Radio programing help
STP8140 = no keypad to tap *477 or *435
On limited or no keypad versions to get engineering menu:
press red button and turn 3 times the rottary knob... both directions shows things
If you are on FW above 10.19, must buy SALT-licence to do that.
Last edited by 580-Gabor; 2024-02-16 at 07:55 PM
-
Post Thanks - 2 Thanks
-
Junior Member
Reputation: 13
Re: STP8X Radio programing help
Nothing happens when I try that
Sadly, I still don't have programming cable for the STP8X, I'll make one soon and try with Radio Manager Toolbox.
Bookmarks