Thanks Thanks:  0
Showing results 1 to 2 of 2

Thread: Accumulated interference power for PRB

  1. #1
    Member Reputation: 21
    Join Date
    2016-04-05
    Location
    Spain
    Posts
    82


    Default Accumulated interference power for PRB

    Hi, according to vendor doc, the following parameters

    pmRadioRecInterferencePwrPrb1
    The accumulated interference power for PRB1
    Unit: mW * 2^(-44)
    Scanner: Not included in any predefined scanner
    Condition: Samples summed over the measurement period. Measurements are averaged over receive antennas. One sample for each PRB per 40ms.
    Counter type: CC/SUM
    Counter is reset after measurement period: Yes

    How can I convert them to dBm?

    If I apply directly factor 2^(-44) the values make no sense.

    For example, for CELL_1 the value of PMRADIORECINTERFERENCEPWRPRB1 for DAY_1 is

    166744963

    If factor 2^(-44) is applied the mW value is
    9.47835E-06

    and in dBm the value is -50.23 which makes no sense.

    example PRB E4G.jpg

    Thanks in advance.
    Last edited by dannthemann; 2019-04-15 at 06:10 PM

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Member Reputation: 21
    Join Date
    2016-04-05
    Location
    Spain
    Posts
    82


    Default Re: Accumulated interference power for PRB

    Hi, any idea how to convert this counter into dBm?

    Thanks

    pmRadioRecInterferencePwrPrb1The accumulated interference power for PRB1
    Unit: mW * 2^(-44)
    Scanner: Not included in any predefined scanner
    Condition: Samples summed over the measurement period. Measurements are averaged over receive antennas. One sample for each PRB per 40ms.
    Counter type: CC/SUM
    Counter is reset after measurement period: Yes

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •