Thanks Thanks:  0
Showing results 1 to 5 of 5

Thread: Traffic Balancing

  1. #1
    Junior Member Reputation: 10
    Join Date
    2010-05-26
    Posts
    10


    Post Traffic Balancing

    Hi,

    I have a 3G site with 3 cells, two of these cells is having a very high traffic, I'd like to push traffic to the cell with low traffic in both idle and dedicated modes, I also want to make handover from the other cells little bit hard, any suggestions about the required parameters or feature?

    Thanks

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Junior Member Reputation: 13
    Join Date
    2017-08-29
    Posts
    2


    Default Re: Traffic Balancing

    You can tune compressed mode parameters
    And you can use hsifls feature in E******* and let's fast the load sharing by tune hsiflsuserth

  4. #3
    Member Reputation: 47
    Join Date
    2010-08-02
    Posts
    193


    1 out of 1 members found this post helpful.

    Default Re: Traffic Balancing

    well, if the vendor is huawei... when you have for example 2 layers (2 freqs) and co-sector (means similar coverage) you get cells balanced automatically in rrc as part of a load balancing feature.
    if you have only 3 cells i assume the coverage of every cell is different how can you expect to push traffic there ?
    in any case there´s a load intrafreq balancing feature as part of LDB algorithm in huawei...
    which vendor is your case ? and also, which coverage those 3 cells have ? you cant push traffic if coverage is different

  5. #4
    Junior Member Reputation: 11
    Join Date
    2014-10-07
    Posts
    5


    Default Re: Traffic Balancing

    You must try with a features of load balance and tune it.
    Also you can try modify parameters like QHyst, sIntraSearch, sInterSearch.

    It’s important you put the relation’s inter and intra.

  6. #5
    Senior Member Reputation: 490
    Join Date
    2008-08-14
    Posts
    2,940


    Default Re: Traffic Balancing

    Quote Originally Posted by Meek View Post
    Hi,

    I have a 3G site with 3 cells, two of these cells is having a very high traffic, I'd like to push traffic to the cell with low traffic in both idle and dedicated modes, I also want to make handover from the other cells little bit hard, any suggestions about the required parameters or feature?

    Thanks
    Are these High & low traffic cells covering same area or different area?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •