Thanks Thanks:  0
Showing results 1 to 6 of 6

Thread: LTE RAN Utilization : How to measure ?

  1. #1
    Member Reputation: 46
    Join Date
    2011-02-03
    Posts
    344


    Default LTE RAN Utilization : How to measure ?

    Dear LTE experts,

    Trying to evaluate my network RAN capacity and how well it's utilized, I wonder what will be the best practice to trigger a LTE capacity extension ?

    To some point, a higher LTE PRB load does not always mean a capacity outage since few number of UE may cause PRB Overload and it is directly related to Traffic type and user behavior.

    From your experience, what will be the best combination to trigger LTE capacity extension (PRB, UE, OSS Throughput ...)?



    Thanks

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 238
    Join Date
    2009-01-21
    Posts
    517


    Default Re: LTE RAN Utilization : How to measure ?

    Hi

    RRC users and payload could be good indicator.

    In nokia you can get precise capacity based on overload indicators - refer LTE056.

    Rgds
    Plannerguy

  4. #3
    Member Reputation: 75
    Join Date
    2013-10-02
    Posts
    13


    Default Re: LTE RAN Utilization : How to measure ?

    Some additional check:
    User Capacity Usage
    PDCCH Resource Usage
    Paging Resource Usage

    Normally expansion triggered when :
    example:
    User Perceived Throughput <2Mbps and PRB utilization>80%

  5. #4
    Member Reputation: 44
    Join Date
    2011-05-24
    Posts
    172


    Default Re: LTE RAN Utilization : How to measure ?

    You need to check the counters already mentioned. Its also worthwhile checking the Minimum no of used PRBs on a low granularity(eg. 15 minute counters), No of users with data in buffer, delay in the scheduler etc. There is no magic counter/KPI that will tell you so you need to build up a picture of what is happening.

  6. #5
    Member Reputation: 38
    Join Date
    2010-08-02
    Posts
    170


    Default Re: LTE RAN Utilization : How to measure ?

    users vs avg user dl Throughput is a good indicator.
    like you said sometimes you get high prb and low throughput...
    u must also observe mean CQI we found usefull that as well.
    we also observed UL interference influenced on throughput as well...
    and besides all commented by other guys... if you have TX issue (bootleneck) you wont always be certain hehehe! sometimes a tx bootleneck is far away your site and low throughput wont be noticed (that is a pain as tx guys wont accept they have bootlenecks) cheers

  7. #6
    Member Reputation: 17
    Join Date
    2017-07-08
    Location
    Saudi Arabia
    Posts
    11


    Default Re: LTE RAN Utilization : How to measure ?

    how we can check for the Tx bottleneck when we are aiming to measure over all capacity or cell capability.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •