Thanks Thanks:  161
Page 4 of 35 FirstFirst ... 2345614 ... LastLast
Showing results 31 to 40 of 348

Thread: Actix New Version

  1. #31
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    2 out of 2 members found this post helpful.

    Default Re: Actix New Version

    19 /03 version

    installer
    https://mega.nz/#!3Z4EESCI

    release note
    https://mega.nz/#!7dJDxCAT!vmyZpyQMy...5kCELj_6Lw0pQY



    • Technology support
      • NR_Scan_Beam_Set_SortedBy_RSRP[ ]
      • New stateform for individual beam support


      • 5G-NR: support added for PCTel DTR export format (mmWave requires 5G-NR platform license)



    • Accuver XCAL DRM improvements
      • Improvements in stability during loading of XCAL-Harmony scanner files

    • AzenQOS AZM (raw) improvements
      • Improvements in the decode of BLER, Num RBs, and RTP Codec Type


    • Hugeland formats
      • Installation of the decode has been made an optional step during Analyzer installation. The support for this format must now be selected during installation, as it requires VC++2008 runtime libraries which are no longer installed by default

    • InfoVista TEMS improvements
      • Improvements made to the physical layer throughput, depending on whether TEMS-specific attributes are selected, or whether device chipset messages should be used in the calculation.

    • PCTEL DTR improvements
      • Support added for 5G-NR scanner measurements, including mmWave (mmWave requires 5G-NR platform license)

    • Qualcomm improvements
      • Support added for CA Activation / Deactivation events

    • Rohde & Schwarz QualiPoc improvements
      • Improvements made to PING tasks, and other Data Testing attributes

    • Various improvements to Freewill AzenQOS AZM, InfoVista TEMS, Meritech Sigma-LA, Qualcomm QXDM, Rohde & Schwarz ROMES4/QualiPOC, VoLTE event detection.
    • Platform improvements
      • Optional timestamp column
      • Configurable font selection
      • Highlighting of current message
      • Truncation of long message titles and tooltips
      • Jump to currently selected message button


      • 5G-NR stateform added
      • DLAA stateform added
      • Call Flow Viewer improvements, including
      • Removal of VC++ 2008 from installation pre-requisites
      • Connection test button for BING maps
      • Superstreaming matching on StreamName
    Attached Files Attached Files
    Last edited by BlackX; 2020-01-13 at 01:45 PM

  2. #32
    Senior Member Reputation: 463
    Join Date
    2009-01-23
    Posts
    437


    Default Re: Actix New Version

    Can u share the 5g NR log file pl for study purpose pl.

  3. Thanks justdream thanked for this post
  4. #33
    Senior Member Reputation: 322
    Join Date
    2012-03-21
    Location
    Dubai - Abu dhabi
    Posts
    358


    Default Re: Actix New Version

    Dear BlackX
    how can i get any version not the last one "but work with 4G and can read the swissqual or ROMS log files"with worked lic

    Quote Originally Posted by BlackX View Post
    19 /03 version

    installer
    https://mega.nz/#!3Z4EESCI

    release note
    https://mega.nz/#!3A5ilIhZ!0eJzNlEdH...W4NMbqlD8c9jtU



    • Technology support
      • NR_Scan_Beam_Set_SortedBy_RSRP[ ]
      • New stateform for individual beam support


      • 5G-NR: support added for PCTel DTR export format (mmWave requires 5G-NR platform license)



    • Accuver XCAL DRM improvements
      • Improvements in stability during loading of XCAL-Harmony scanner files

    • AzenQOS AZM (raw) improvements
      • Improvements in the decode of BLER, Num RBs, and RTP Codec Type


    • Hugeland formats
      • Installation of the decode has been made an optional step during Analyzer installation. The support for this format must now be selected during installation, as it requires VC++2008 runtime libraries which are no longer installed by default

    • InfoVista TEMS improvements
      • Improvements made to the physical layer throughput, depending on whether TEMS-specific attributes are selected, or whether device chipset messages should be used in the calculation.

    • PCTEL DTR improvements
      • Support added for 5G-NR scanner measurements, including mmWave (mmWave requires 5G-NR platform license)

    • Qualcomm improvements
      • Support added for CA Activation / Deactivation events

    • Rohde & Schwarz QualiPoc improvements
      • Improvements made to PING tasks, and other Data Testing attributes

    • Various improvements to Freewill AzenQOS AZM, InfoVista TEMS, Meritech Sigma-LA, Qualcomm QXDM, Rohde & Schwarz ROMES4/QualiPOC, VoLTE event detection.
    • Platform improvements
      • Optional timestamp column
      • Configurable font selection
      • Highlighting of current message
      • Truncation of long message titles and tooltips
      • Jump to currently selected message button


      • 5G-NR stateform added
      • DLAA stateform added
      • Call Flow Viewer improvements, including
      • Removal of VC++ 2008 from installation pre-requisites
      • Connection test button for BING maps
      • Superstreaming matching on StreamName

  5. #34
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    Default Re: Actix New Version

    Sorry bro, i have no log for 5G, those chart are copied from release note

    there is a older version 18/09, check this

    http://www.finetopix.com/showthread....l=1#post269989

    if it is still not worked, you can try v5.5.338.947 or v5.5.349.850 [they are 2016 version], you can find the installer and m ed in forum

  6. #35
    Member Reputation: 62
    Join Date
    2017-05-20
    Location
    Nicaragua
    Posts
    18


    3 out of 3 members found this post helpful.

    Default Re: Actix New Version

    Hello friends, here I share actix with your mediciona version 5.5.354.355.
    please give me reputation

    https://mega.nz/#!IwISjYaS!miFIF7waK...17IUAxWcL_qmxk

  7. Thanks justdream, Yaya81, alitomtom, juanka21 thanked for this post
  8. #36
    Junior Member Reputation: 11
    Join Date
    2010-02-17
    Location
    Chile
    Posts
    27


    Default Re: Actix New Version

    Quote Originally Posted by jose gomez View Post
    Hello friends, here I share actix with your mediciona version 5.5.354.355.
    please give me reputation

    https://mega.nz/#!IwISjYaS!miFIF7waK...17IUAxWcL_qmxk
    excelllent donload now, tomorrow use it

    thanx

  9. #37
    Member Reputation: 59
    Join Date
    2009-05-25
    Posts
    110


    Default Re: Actix New Version

    Hi BlackX,
    Can you tell me how can i use the license in your attachment 1903.txt
    Quote Originally Posted by BlackX View Post
    19 /03 version

    installer
    https://mega.nz/#!3Z4EESCI

    release note
    https://mega.nz/#!3A5ilIhZ!0eJzNlEdH...W4NMbqlD8c9jtU



    • Technology support
      • NR_Scan_Beam_Set_SortedBy_RSRP[ ]
      • New stateform for individual beam support


      • 5G-NR: support added for PCTel DTR export format (mmWave requires 5G-NR platform license)



    • Accuver XCAL DRM improvements
      • Improvements in stability during loading of XCAL-Harmony scanner files

    • AzenQOS AZM (raw) improvements
      • Improvements in the decode of BLER, Num RBs, and RTP Codec Type


    • Hugeland formats
      • Installation of the decode has been made an optional step during Analyzer installation. The support for this format must now be selected during installation, as it requires VC++2008 runtime libraries which are no longer installed by default

    • InfoVista TEMS improvements
      • Improvements made to the physical layer throughput, depending on whether TEMS-specific attributes are selected, or whether device chipset messages should be used in the calculation.

    • PCTEL DTR improvements
      • Support added for 5G-NR scanner measurements, including mmWave (mmWave requires 5G-NR platform license)

    • Qualcomm improvements
      • Support added for CA Activation / Deactivation events

    • Rohde & Schwarz QualiPoc improvements
      • Improvements made to PING tasks, and other Data Testing attributes

    • Various improvements to Freewill AzenQOS AZM, InfoVista TEMS, Meritech Sigma-LA, Qualcomm QXDM, Rohde & Schwarz ROMES4/QualiPOC, VoLTE event detection.
    • Platform improvements
      • Optional timestamp column
      • Configurable font selection
      • Highlighting of current message
      • Truncation of long message titles and tooltips
      • Jump to currently selected message button


      • 5G-NR stateform added
      • DLAA stateform added
      • Call Flow Viewer improvements, including
      • Removal of VC++ 2008 from installation pre-requisites
      • Connection test button for BING maps
      • Superstreaming matching on StreamName

  10. #38
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    Default Re: Actix New Version

    it is not license but a password to download installer

  11. #39
    Senior Member Reputation: 490
    Join Date
    2008-08-14
    Posts
    2,940


    Default Re: Actix New Version

    Quote Originally Posted by jose gomez View Post
    Hello friends, here I share actix with your mediciona version 5.5.354.355.
    please give me reputation

    https://mega.nz/#!IwISjYaS!miFIF7waK...17IUAxWcL_qmxk
    Kindly what's the Release Date of this version 5.5.354.355.
    2018 or 2019?

  12. Thanks miro thanked for this post
  13. #40
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    Default Re: Actix New Version

    >Kindly what's the Release Date of this version 5.5.354.355.
    >2018 or 2019?

    it is 2017/02 version

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •