Thanks Thanks:  1
Showing results 1 to 4 of 4

Thread: Pctel MX power connector

  1. #1
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    Default Pctel MX power connector

    A friend gave me a Pctel MX scanner to play around,
    but somewhere he lost the power cable in some of DT car.
    (No, the device is not stolen)))

    Friend soldered me a bypass cable and gave me a power supply,
    but maybe it works when the power is 230, not my 160V.
    im my case - device don't boot with two RF. only with one.

    Please tell me the marking of the power connector.
    I want mage good copper cable to throw on the 150Ah battery.

    I also solder my wire, but The device consumes 70+ watts
    and wire that I soldered - very hot, and Voltage without RF board <10 Volt.

    so, please, tell me model of power connector at pctel MX?

    Thanks.
    pctel_mx_power.jpg
    /carv

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    Default Re: Pctel MX power connector

    found. it's lemo 2b 303 series
    /carv

  4. #3
    Member Reputation: 35
    Join Date
    2007-11-27
    Posts
    119


    1 out of 1 members found this post helpful.

    Default Re: Pctel MX power connector

    it is no need to use MX scanner, power consumption is quite high, just use DRT4311B is OK, only 10 Watts, search it within Ebay

  5. Thanks carver thanked for this post
  6. #4
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    Default Re: Pctel MX power connector

    thank.

    yea, the receiver consumes a lot.
    the thin wires were warming up at me,
    and the receiver was working unstably.

    Now I monitor the power.

    0101191902a-1.jpg
    /carv

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •