-
VIP Member
Reputation: 1852
Pctel MX power connector
A friend gave me a Pctel MX scanner to play around,
but somewhere he lost the power cable in some of DT car.
(No, the device is not stolen)))
Friend soldered me a bypass cable and gave me a power supply,
but maybe it works when the power is 230, not my 160V.
im my case - device don't boot with two RF. only with one.
Please tell me the marking of the power connector.
I want mage good copper cable to throw on the 150Ah battery.
I also solder my wire, but The device consumes 70+ watts
and wire that I soldered - very hot, and Voltage without RF board <10 Volt.
so, please, tell me model of power connector at pctel MX?
Thanks.
pctel_mx_power.jpg
-
2018-12-29 08:13 AM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1852
Re: Pctel MX power connector
found. it's lemo 2b 303 series
-
Member
Reputation: 35
1 out of 1 members found this post helpful.
Re: Pctel MX power connector
it is no need to use MX scanner, power consumption is quite high, just use DRT4311B is OK, only 10 Watts, search it within Ebay
-
Post Thanks - 1 Thanks
-
VIP Member
Reputation: 1852
Re: Pctel MX power connector
thank.
yea, the receiver consumes a lot.
the thin wires were warming up at me,
and the receiver was working unstably.
Now I monitor the power.
0101191902a-1.jpg
Bookmarks