Thanks Thanks:  0
Showing results 1 to 3 of 3

Thread: Inactivity timer for LTE TDD

  1. #1
    Member Reputation: 78
    Join Date
    2010-05-15
    Posts
    87


    Default Inactivity timer for LTE TDD

    Hello Experts,

    what's the recommended value for inactivity timer for LTE TDD (fixed CPEs scanario)

    thanks,

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    VIP Member Reputation: 1624
    Join Date
    2010-04-23
    Location
    Polar Bear
    Posts
    966


    Default Re: Inactivity timer for LTE TDD

    we kept it default, we tried increasing it too. but did not make much difference in service connectivity but RRc license requirement increased. I would not recommend it.
    Auto_artNPM Consul.Default PAS: londonpl rate threads for their usefulnesshare & care

  4. #3
    Member Reputation: 16
    Join Date
    2015-01-07
    Posts
    20


    Default Re: Inactivity timer for LTE TDD

    On Huawei we use 20 seconds for a TDD WTTx-like scenario. Lowering it too much will result in increased (and unnecessary) signalling load. I would recommend something between 20 and 30 seconds for WTTx 10-20 seconds for normal MBB usecase. You can also investigate by analyzing your current pattern to see if the setting is not too low/high for your current usecase.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •