-
Users Awaiting Email Confirmation
Reputation: 374
5 out of 5 members found this post helpful.
Atoll General Add-ins
Hi
These are Atoll General Add-ins
http://www.rapidshare.com.cn/FXIKwyu
General Add-ins
3D Viewer 1.0.0 **NEW**
View the mapwindow in 3D
To enable your 3D viewer on your license, please contact your support centre with your license reference.
Last update: August 10th, 2018
Network Topology Display 1.0.0 **NEW**
Create vectors to represent links between network entities such as remote transmitter or relay links
Last update: July 17th, 2018
Cross-resolution Predictions 1.0.2
Produce prediction coverage statistics from several coverage areas with different resolutions
Last update: October 3rd, 2018
Rec ITU 528.3 1.0.0
Compute a signal attenuation in a Ground-to-Air, Air-to-Ground and Air-to-Air context using a statistical approach.
Last update: January 17th, 2018
Antenna Audit Utilities 1.1.0
Run 3 commands:
- Antenna Catalog Audit: List unused antennas and pattern
- Antenna System Audit: Search inconsistencies in transmitters that use same physical antenna or same antenna pattern
- Antenna Inventory: Produce an inventory of shared antenna system
Last update: February 08th, 2017
PredictionsOnTransmitterLists 1.0.1
Calculate selected predictions on a list of selected transmitter lists.
Last Update: June 30th 2017
Export to Google Earth 4.9.1
Export Atoll's entities to Google Earth application
Last update: September 6th, 2018
3D Antenna Viewer 2.0.0
Visualize antenna patterns as a 3D model
Last update: July 16th, 2018
Bulk Site Creation 2.0.0
Create several sites and transmitters at once from a list of site names and coordinates.
Last update: July 20th, 2018
Coverage on Vectors 1.2.0
Calculate coverage predictions along vectors
Last update: July 5th, 2018
Cell Size Calculation 1.1.2
Calculate the size of cells
Calculate the required number of PRACH RSIs
Last update: January 11th, 2018
Small Cell Selection 2.0.2
Setup and automatically run small cell site selection using Atoll ACP.
To be used from Atoll v3.3.0 (build 7221 and above)
Last update: March 5th, 2018
Power Split 1.1.3
Split power between a transmitter and its remote antennas by assigning splitter losses
Last update: July 7th, 2016
Easy Location Converter 1.6.1
Calculate site's offsets and absolute locations of transmitters
Last update: August 28th, 2017
Multistorey Prediction 1.3.0
Calculate coverage predictions at different receiver heights
Last update: July 17th, 2018
ArcView Grid ASCII Import 1.2.1
Import ArcView Grid ASCII files by converting them to BIL format
Last update: March 5th, 2018
Multi-RAT Converter 1.3.1
Convert single-RAT to multi-RAT documents
Last update: August 17th, 2016
Signal Level Export 5.5.5
Export signal levels received from transmitters at each pixel of a user defined area
Source code provided
Last update: February 1st, 2016
Difference Plot 3.1.0
Show the difference of signal levels between two selected signal level based coverage predictions
Last update: February 10th, 2015
Update Sites With Geo Data 1.4.0
Update the sites table with custom fields containing the corresponding clutter classes, clutter heights and altitudes
Last update: April 23rd, 2018
FCC Boundaries 2.5.1
Build contours in Atoll's documents and generate related FCC 601 reports
Last update: April 27th, 2018
Incidence Angle Footprint 1.2.2
The Incidence Angle Footprint add-in can be used to display on the map the incidence angle footprint of the transmission path between a mobile and a radio antenna for a certain range of tilts.
Mobile phone companies can use this add-in to improve the performance of their networks by adjusting antennas mechanical tilt.
Last update: September 7th, 2018
-
Post Thanks - 12 Thanks
Roman99,
Stantheman,
DANORM,
slava121,
engine-driver,
zeuscane,
ubik,
Boraa,
rkdrkd,
besoeso,
dmitry28,
SRRFWIRELESS7 thanked for this post
-
2018-10-07 05:57 AM
# ADS
Circuit advertisement
-
Member
Reputation: 143
Re: Atoll General Add-ins
-
Member
Reputation: 25
Re: Atoll General Add-ins
This link is so dead, whats up?
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
I will upload it later when am less busy.
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
3D Viewer 1.0.0 **NEW**
View the mapwindow in 3D
To enable your 3D viewer on your license, please contact your support centre with your license reference.
Last update: August 10th, 2018
https://www.upload.ee/files/9093499/3DAntennaViewer_1.0.0.zip.html
Last edited by henry3499; 2018-10-21 at 10:20 AM
-
Post Thanks - 2 Thanks
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
ArcView Grid ASCII Import 1.2.1
Import ArcView Grid ASCII files by converting them to BIL format
Last update: March 5th, 2018
https://www.upload.ee/files/9093530/ArcViewGridASCIIImport_1.1.2.zip.html
-
Post Thanks - 2 Thanks
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
Incidence Angle Footprint 1.2.0
The Incidence Angle Footprint add-in can be used to display on the map the incidence angle footprint of the transmission path between a mobile and a radio antenna for a certain range of tilts.
Mobile phone companies can use this add-in to improve the performance of their networks by adjusting antennas mechanical tilt.
Last update: September 7th, 2018
https://www.upload.ee/files/9093583/IncidenceAngleFootprint_1.2.0.zip.html
-
Post Thanks - 2 Thanks
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
Update Sites With Geo Data 1.3.0
Update the sites table with custom fields containing the corresponding clutter classes, clutter heights and altitudes
Last update: April 23rd, 2018
https://www.upload.ee/files/9093601/UpdateSitesWithGeoData_1.3.0.zip.html
-
Post Thanks - 2 Thanks
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
Difference Plot 3.1.0
Show the difference of signal levels between two selected signal level based coverage predictions
Last update: February 10th, 2015
https://www.upload.ee/files/9093609/DifferencePlot_3.1.0.zip.html
-
Post Thanks - 2 Thanks
-
BannedUser
Reputation: 364
2 out of 2 members found this post helpful.
Re: Atoll General Add-ins
Signal Level Export 5.5.5
Export signal levels received from transmitters at each pixel of a user defined area
Source code provided
Last update: February 1st, 2016
x86
https://www.upload.ee/files/9093627/SignalLevelExport_5.5.5.100.exe.zip.html
x64
https://www.upload.ee/files/9093643/...0.exe.zip.html
x86
https://www.upload.ee/files/9093650/...0.exe.zip.html
x64
https://www.upload.ee/files/9093652/...0.exe.zip.html
-
Post Thanks - 3 Thanks
Bookmarks