-
Junior Member
Reputation: 10
How to add Band-28 [700] to Atoll
Guys,
i need to add Band 28 10MHz BW, as per below picture
2018-09-24_163913.jpg
and the band data for E-Utran Band 1800,
-
2018-09-24 11:43 PM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1933
1 out of 1 members found this post helpful.
Re: How to add Band-28 [700] to Atoll
Good afternoon!
The data for the E-Utran "Band 3" band is marked in red.
Atoll_1800.jpg
This is a standard template, you do not need to create one.
For the E-Utran Band 28, you need to create data, because it is not a standard Frequency Bands LTE d Atoll template.
Name |
Duplexing Method |
TDD: Start Frequency, FDD: DL Start Frequency (MHz) |
FDD: UL Start Frequency (MHz) |
Channel Width (MHz) |
Inter-channel spacing (MHz) |
Number of Frequency Blocks |
Sampling Frequency (MHz) |
First channel |
Last channel |
Step |
Excluded Channels |
Adjacent Channel Suppression Factor (dB) |
E-UTRA Band 28 - 10MHz |
FDD |
758 |
703 |
10 |
0 |
50 |
15,36 |
9 210 |
9 659 |
100 |
|
28,23 |
It is necessary to insert this data in the bottom line with *.
Best regards, Slava.
Originally Posted by
Defrovic
Guys,
i need to add Band 28 10MHz BW, as per below picture
2018-09-24_163913.jpg
and the band data for E-Utran Band 1800,
Last edited by slava121; 2018-09-25 at 12:45 AM
-
Post Thanks - 2 Thanks
-
Junior Member
Reputation: 10
Re: How to add Band-28 [700] to Atoll
Thanx, alot
Bookmarks