Thanks Thanks:  3
Showing results 1 to 10 of 10

Thread: Sepura STP8X programming cable

  1. #1
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Sepura STP8X programming cable

    Hi,
    Does anyone have information on how to build a programming cable for Sepura STP8X-series radios?
    It attaches to the side connector and that connector is different from the normal STP8/9000 -series connector.

    My guess is that it's straight USB but can't be sure.

    Any advice?

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Junior Member Reputation: 14
    Join Date
    2017-03-22
    Posts
    16


    2 out of 2 members found this post helpful.

    Default Re: Sepura STP8X programming cable

    IMG_5949.jpg
    1 charge - 10,1 V
    2
    3
    4 black GND
    5
    6
    7
    8
    9 brown CTS#
    10 green RTS#
    11 blue DSR#
    12 yellow RxD
    13 orange TxD
    14 gray DTR#
    15
    16
    17
    18 charge + 10,1 V

    FTDI chip board is required, some people say that only RXD, TXD, GND need to be soldered

  4. Thanks Shuttleman thanked for this post
  5. #3
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Re: Sepura STP8X programming cable

    Sorry, could you post the picture somewhere else? It seems I don't have the rep power needed to view attachments.

  6. #4
    Junior Member Reputation: 11
    Join Date
    2018-04-09
    Posts
    32


    Default Re: Sepura STP8X programming cable

    easier... I build such cable... you need a UBS to TTL HW 597 on 3,3V and the adpter for the radio. Only 3 pins TX, RX an GND.
    Best regards!

  7. #5
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Re: Sepura STP8X programming cable

    Sorry, the given pinout above is for STP8000/STP9000. Not for STP8X (ATEX).
    I need the pinout to build a programming cable for STP8X, it connects to the side connector (RAC), it doesn't have a bottom connector (FAC).
    It's 14pin, whereas the STP8000 FAC is 2+16pin and STP8000 RAC is 11 pin.

    Best regards,
    Martin

  8. #6
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Re: Sepura STP8X programming cable

    STP8X pinout, radio view top left 1, top right 2 and so on.
    1 Sasi?
    2 Mic-?
    3 ? SPKR+?
    4 ? SPKR-?
    5 GND
    6 Mic+?
    7 GND?
    8 ?
    9 3,6V?
    10 3,3V TTL RX
    11 3,3V TTL TX

    12 ?
    13 ?
    14 ?

    I've bolded those I'm certain of.

  9. Thanks blacky83, spyman thanked for this post
  10. #7
    Junior Member Reputation: 11
    Join Date
    2018-04-09
    Posts
    32


    Default Re: Sepura STP8X programming cable


  11. #8
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Re: Sepura STP8X programming cable

    Once again, STP8X, not STP8000.

  12. #9
    Junior Member Reputation: 10
    Join Date
    2018-02-11
    Posts
    2


    Default Re: Sepura STP8X programming cable

    Hello,
    does 5 GND, 10 3.3V TTL RX, 11 3.3V TTL TX now fit for the STP8x?

  13. #10
    Junior Member Reputation: 10
    Join Date
    2018-02-11
    Posts
    2


    Default Re: Sepura STP8X programming cable

    Yeah! Tried it and it worked.
    Thanks for showing the connection! Didn't find it anywhere else!

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •