-
Junior Member
Reputation: 10
MTP700 with broken/no codeplug
Hi everyone,
I recently acquired a ******** MTP700 with an old (engineering?) firmware version R76.01.00. I managed to update to R76.03.10 and read the codeplug using the MR3.01 CPS. Unfortunately, I didn't stop there and tried to update to R040003357 using the "lab" CPS 7A/B.398.01. That update failed in the middle and now I'm stuck with a radio without a codeplug on it. I do have a backup of the original codeplug and the first update to codeplug version 1617, but I can't write those to the radio because I keep getting the "Unable to detect the radio codeplug location" error. I was able to put the radio in flash mode and finish writing the R040003357 firmware to it, but without a codeplug of course it won't boot.
Searching through this forum, I see that a couple of others had similar problems, but I couldn't find if/how they fixed it. Right now, I'm out of ideas and open to help!
Thanks in advance,
--crytic
-
2018-09-08 10:31 PM
# ADS
Circuit advertisement
Bookmarks