Thanks Thanks:  4
Showing results 1 to 10 of 10

Thread: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

  1. #1
    Senior Member Reputation: 740
    Join Date
    2009-11-20
    Posts
    341


    Default How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Hi
    Does anybody have a detailed procedure on how to configure Nemo Outdoor ver 8 with Scanner and Samsung S8.
    Is NMR must for samsung S8? Is Nemo Handy must?
    How can I confirm that the Samsung S8 I have has all the pre-reqs to work with nemo outdoor?
    What drivers are needed, how to configure COM ports etc. I am looking for someone who can walk me through.

    Also same question for Scanner configuration, has anybody connected JDSU Scanner?
    Procedure Please.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    check attached file to download device-connection guide from NEMO

    https://mega.nz/#!SAoUFQJJ!ekf-1eb7L...fzzyiYP_Q-rgpw

    And no JDSU scanner found in device list

    NMR in using to reduce the CPU loading to prevent that high CPU loading impact performance when you connect multi UEs to one laptop, and some special test like MOS must use NMR

  4. #3
    Senior Member Reputation: 740
    Join Date
    2009-11-20
    Posts
    341


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Thankyou so much.
    2 further questions:
    1. Do you have latest version of these documents.
    2. Do you also have the scanner configuration guide similar to device configuration guide.

  5. #4
    Member Reputation: 35
    Join Date
    2007-11-27
    Posts
    119


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    you can flash the JDSU scanner to "Venture MRX 3808A-L", then can use Nemo outdoor

  6. Thanks carver thanked for this post
  7. #5
    Senior Member Reputation: 608
    Join Date
    2010-10-08
    Posts
    443


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Quote Originally Posted by crisnspro View Post
    you can flash the JDSU scanner to "Venture MRX 3808A-L", then can use Nemo outdoor
    I have jdsu w1314b scanner.could you pls share the firmware

  8. Thanks carver thanked for this post
  9. #6
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    563


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    thanks for the info. both look similar.
    http://www.v-comms.com/mrx3808al.html
    also has jdsu w1314a and interesting what models can convert ))
    /carv

  10. #7
    Member Reputation: 35
    Join Date
    2007-11-27
    Posts
    119


    1 out of 1 members found this post helpful.

    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    only the factory has it, we have no, any way, JDSU already give up the scanner for 2 years, also the MRX scanner no people use it since its poor performance.

  11. Thanks carver thanked for this post
  12. #8
    Senior Member Reputation: 608
    Join Date
    2010-10-08
    Posts
    443


    1 out of 1 members found this post helpful.

    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Nemo outdoor v8.0 supports JDSU Scanner in their hardware list. But my W1314A is not getting detected.Any particular firmware needed for this?

    Sorry it is working after reinstalling driver.Really wonder how they have added this age old scanner anyways good for me.
    Last edited by techfolkcmr; 2018-11-27 at 12:12 AM
    Please add reputation by clicking * at left bottom of post & Hit Thanks and report Helpful by clicking Thumps Up if you like my post . Knowledge is Power & Sharing is Caring.

  13. Thanks carver thanked for this post
  14. #9
    Junior Member Reputation: 10
    Join Date
    2019-03-15
    Posts
    1


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Quote Originally Posted by techfolkcmr View Post
    Nemo outdoor v8.0 supports JDSU Scanner in their hardware list. But my W1314A is not getting detected.Any particular firmware needed for this?

    Sorry it is working after reinstalling driver.Really wonder how they have added this age old scanner anyways good for me.
    What drivers did you install? My W1314B is also not detectable.

  15. #10
    Member Reputation: 16
    Join Date
    2019-03-06
    Posts
    54


    Default Re: How to connect JDSU Scanner and Samsung S8 to Nemo Outdoor

    Quote Originally Posted by optron View Post
    What drivers did you install? My W1314B is also not detectable.
    if confirm drivers is installed
    plz check nemo feature

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •