Thanks Thanks:  6
Showing results 1 to 2 of 2

Thread: Simplified Robust Adaptive Detection and Beamforming for Wireless Communications

  1. #1
    VIP Member Reputation: 1243
    Join Date
    2010-03-25
    Posts
    596


    1 out of 1 members found this post helpful.

    Default Simplified Robust Adaptive Detection and Beamforming for Wireless Communications

    Hi All,

    Could someone share a book "Simplified Robust Adaptive Detection and Beamforming for Wireless Communications" by Ayman Elnashar who has this book ? I need it. Thanks a lot of

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    VIP Member Reputation: 2272
    Join Date
    2009-10-01
    Posts
    1,409


    4 out of 4 members found this post helpful.

    Default Re: Simplified Robust Adaptive Detection and Beamforming for Wireless Communications

    Ayman Elnashar, "Simplified Robust Adaptive Detection and Beamforming for Wireless Communications"
    English | 2018 | ISBN: 9781118938249 | 416 pages | PDF | 8.25 MB

    This book presents an alternative and simplified approaches for the robust adaptive detection and beamforming in wireless communications. It adopts several systems models including DS/CDMA, OFDM/MIMO with antenna array, and general antenna arrays beamforming model. It presents and analyzes recently developed detection and beamforming algorithms with an emphasis on robustness. In addition, simplified and efficient robust adaptive detection and beamforming techniques are presented and compared with exiting techniques. Practical examples based on the above systems models are provided to exemplify the developed detectors and beamforming algorithms. Moreover, the developed techniques are implemented using MATLAB and the relevant MATLAB scripts are provided to help the readers to develop and analyze the presented algorithms. Simplified Robust Adaptive Detection and Beamforming for Wireless Communications starts by introducing readers to adaptive signal processing and robust adaptive detection. It then goes on to cover Wireless Systems Models. The robust adaptive detectors and beamformers are implemented using the well–known algorithms including LMS, RLS, IQRD–RLS, RSD, BSCMA, CG, and SD. The robust detection and beamforming are derived based on the existing detectors/beamformers including MOE, PLIC, LCCMA, LCMV, MVDR, BSCMA, and MBER. The adopted cost functions include MSE, BER, CM, MV, and SINR/SNR.

    http://nitroflare.com/view/3BB7E39A0...1118938240.pdf
    or
    https://rapidgator.net/file/e49082cc...38240.pdf.html

  4. Thanks hendral, Stantheman, zeuscane, Nyquist, barbus, hoangtuna thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •