-
VIP Member
Reputation: 1934
6 out of 6 members found this post helpful.
RF planning and designing of air interface by using ATOLL Platform
Good afternoon! Here is the description: RF planning and design of air interface by using ATOLL Platform. Probably interesting. Best regards. Slava
RF planning and designing of air interface by using ATOLL Platform.rar
-
Post Thanks - 10 Thanks
-
2018-06-08 07:42 PM
# ADS
Circuit advertisement
-
Junior Member
Reputation: 7
Re: RF planning and designing of air interface by using ATOLL Platform
Thank you Slava. I have some documents but I can not upload
-
VIP Member
Reputation: 1934
Re: RF planning and designing of air interface by using ATOLL Platform
-
Re: RF planning and designing of air interface by using ATOLL Platform
Originally Posted by
slava121
Is it useful for indoor design as well?
Last edited by vivekp0224; 2019-05-19 at 01:17 AM
-
VIP Member
Reputation: 1934
Re: RF planning and designing of air interface by using ATOLL Platform
Good afternoon, vivekp0224!
I am not the author of this article. This material is provided here because it is useful for understanding the work when planning a GSM radio network and can be useful to everyone. I did this work for my network.
This article deals with issues of frequency planning of a radio network, hoping, network parameters, calculating the budget of a radio link using Atoll for the GSM network. All this is relevant for uotdoor sites. I want to note that here the issues of radio planning for the GSM network were considered.
When planning the indoor network (UMTS, LTE) has its own nuances. All features are outlined in Atoll 3.xx User Manual Radio.
You need to carefully study you these materials.
Originally Posted by
vivekp0224
Is it useful for indoor design as well?
-
Post Thanks - 2 Thanks
Bookmarks