-
VIP Member
Reputation: 1017
Layered paging in idle mode
dear
kindly find small description about Layered paging in idle mode,thanks
Layered paging in idle mode which divide paging into two layers as follow:
first layer:
UE inform RNC by its last camped cell & its location saved in RNC Table where the information is valid during paging timer thus any incoming paging in idle mode will be directed towards
the last camped UE's cell & its neighbors UE's cells else if timer expired then UE is subject to not accessing network anymore & hence paging in idle mode will go to the second layer(normal paging)
second layer:
it is the normal paging condition where incoming paging is directed to all the users in cells located in the same LAC.
Capture.JPG
Benefits : Layered Paging in Idle Mode reduces the Uu-interface paging load of UEs in idle mode. The reduced paging load is:
-Inversely proportional to the average number of a cell's configured neighboring cells
-Proportional to the number of configured cells in an LA or RA
-Proportional to the first-layer paging success rate
-
2017-06-08 09:48 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 491
Re: Layered paging in idle mode
Dears, did any one in the forum test this feature for Real Time services?
as majority test it only for Non-Real time services
Bookmarks