Thanks Thanks:  1
Showing results 1 to 2 of 2

Thread: Huawei APM30 VER.E

  1. #1
    Member Reputation: 68
    Join Date
    2013-01-12
    Location
    ....
    Posts
    65


    Default Huawei APM30 VER.E

    hi dears


    I want to change fan speed of rack APM30 and change another setting .

    how to change fan speed of apm30 and rfc cabinet in mml command ?

    please help me


    thanks finetopix

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Member Reputation: 108
    Join Date
    2015-01-07
    Posts
    136


    Default Re: Huawei APM30 VER.E

    You cannot change the fan speed that simply.

    The important thing is that all cabinets and boards, and their TCU (Temperature Control Unit), and/or FMU (Fan Monitor Unit), needs to be added and configured first. If that is done, the cabinet controls the fan speed to its factory defined temperatures.

    In an APM30 cabinet, there is usually a TCU which you need to add (ADD TCU), that unit communicates via RS485, so first you need to scan for the address (SCN RS485). After you added the TCU, you can query the available TCU/FMU modes with DSP TCMODE command.

    Based on the output and your usecase (not all options can be applied), you can now modify your TCU config with MOD TCU, at the bottom you will find the Temperature Control Mode, the default mode is 0. This is the list of available TCU temp control modes of my APM30 VER E cabinet TCU options:

    TCU Supported Mode of Temperature Control
    -----------------------------------------
    Serial Number Description

    0 Default Mode
    1 Low Noise Mode (GSM Only)
    2 Low Temperature Mode (GSM Only)
    11 Low Temperature Mode (APM30H&TMC&3900AL&OMB)
    12 Full Speed Mode
    13 Idle Mode
    15 APM30H Bat Mode
    (Number of results = 7)

  4. Thanks M7md thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •