Hi Dimity,
Can you help me please with this add on for export 3D to google earth?
I don't have enough privileges.
BR
Hi Dimity,
Can you help me please with this add on for export 3D to google earth?
I don't have enough privileges.
BR
here is a link to the document
AD002_Export_to_Google_Earth_4.6.7z
Hi,
It is necessary to check the following: what propagation model was used - whether it supports calculation in indoor ?
If you are exporting multi‐storey coverage predictions in raster format, you must set the
following Google Earth options (Tools > Options > 3D View):
• Set Anisotropic Filtering to Off.
• Under Terrain, set Elevation Exaggeration to 0.01.
- I am using Aster and Indoor calculations is enabled.
- Tried exporting in raster all floors and changing GE setting but same issue. Automatically first floor is raster other are vector
- I think problem is itself in atoll predictions, have a look at atoll predictions. I think it should not be like that:
First floor and 4th Floor
3.jpg 4.jpg
In the settings of the propagation models you need to check that the Vector specify the vector of the buildings with the height.
Perhaps you could try to select/use the building vector data layer as the Computation Zone, then run Multi-storey predictions and finally export all of them to GE.
u.
Hi dmitry
I've tried many ways, tried crosswave model also but same results. Have you tried it, whats are your results?
By the way do you have manual for multi-storey prediction plugin?
BR
Bookmarks