-
VIP Member
Reputation: 1716
3D Coverage in Atoll
Hi
How to modell/show 3D coverage in Atoll like below, if i have building heights map?
2018-05-21_11-56-40.jpg
-
2018-05-21 05:57 PM
# ADS
Circuit advertisement
-
Re: 3D Coverage in Atoll
Hi DANCESTORM
I've been searching for this for some time now. How does one create such a view in ATOLL. I have ADTI clutter & Terrain files for my region just need to know how to
create this wonderful overlay [file] for ATOLL using Global Mapper, could you help
REGDS Jesterbean
-
VIP Member
Reputation: 1970
Re: 3D Coverage in Atoll
Good afternoon, DANCESTORM! Atoll does not display a 3D image of the coverage area! But these heights of buildings are taken into account when performing calculations of the coverage area.
-
VIP Member
Reputation: 1716
Re: 3D Coverage in Atoll
That is also my question, how to do it ![:D](http://www.finetopix.com/images/smilies/biggrin.png)
![Quote](images/misc/quote_icon.png)
Originally Posted by
Jesterbean
Hi
DANCESTORM
I've been searching for this for some time now. How does one create such a view in ATOLL. I have ADTI clutter & Terrain files for my region just need to know how to
create this wonderful overlay [file] for ATOLL using Global Mapper, could you help
REGDS Jesterbean
-
VIP Member
Reputation: 1716
Re: 3D Coverage in Atoll
Yes Atoll does the coverage prediction, considering building heights. But that screenshot is taken from Atoll presentation and it is showing 3D coverage in Google Earth.
https://www.slideshare.net/JaChangMa...ing-tool-atoll
Another example is from that presentation, it is also showing in Google Earth. I think there is some way to generate it in 3d and then export it in Google earth and map with 3D buildings:
http://www.finetopix.com/showthread....ities-in-Atoll
34.jpg
![Quote](images/misc/quote_icon.png)
Originally Posted by
slava121
Good afternoon,
DANCESTORM! Atoll does not display a 3D image of the coverage area! But these heights of buildings are taken into account when performing calculations of the coverage area.
-
Post Thanks - 1 Thanks
-
VIP Member
Reputation: 1970
Re: 3D Coverage in Atoll
Good afternoon, ! I am familiar with these presentations. Using the "Export to Google Earth" add-in, you can export the "Coverage by Signal Level (DL)" file in kmz format. The exported image in Google Earth is superimposed on the relief. In the presentation, "LTE-A Pro and 5G Capabilities in Atoll", slide 32, shows a picture with a coating on the building, 3D. Perhaps in the new version of Atoll, the file kmz, 3D is exported. Maybe I'm wrong. What version of Atoll do you use?
-
VIP Member
Reputation: 1716
Re: 3D Coverage in Atoll
I am using 11009 version. I also think that in the new version might be 3D exporting option.
Which other software can do 3D visualization?
As i know there is in Mentum and also in Winprop? No idea about ATDI.
![Quote](images/misc/quote_icon.png)
Originally Posted by
slava121
Good afternoon, ! I am familiar with these presentations. Using the "Export to Google Earth" add-in, you can export the "Coverage by Signal Level (DL)" file in kmz format. The exported image in Google Earth is superimposed on the relief. In the presentation, "LTE-A Pro and 5G Capabilities in Atoll", slide 32, shows a picture with a coating on the building, 3D. Perhaps in the new version of Atoll, the file kmz, 3D is exported. Maybe I'm wrong. What version of Atoll do you use?
-
VIP Member
Reputation: 1970
1 out of 1 members found this post helpful.
Re: 3D Coverage in Atoll
Good afternoon! There is a resource "http://www.gyokovsolutions.com/G-NetTilt/G-NetTilt.php", with which you can construct a covering base station sectors. The source data can be used from Atoll.
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 496
Re: 3D Coverage in Atoll
Hi
Take a look at attached doc on page 8.
https://files.fm/u/e9bzj664
-
VIP Member
Reputation: 1970
Re: 3D Coverage in Atoll
Good afternoon!
Look what you managed to get, using the export capabilities of Google Earth:
1. In the first picture, the base station is shown. At a distance of 420 meters is the building, which is modeled in
SketchUp.
2. Picture # 2, shows "LTE: Coverage by Signal Level (DL) 0", for this base station. The color shows the signal levels. The overlaying picture is a bitmap.
3. Picture # 3, # 4 "LTE: Coverage by Signal Level (DL) 0 - Multi-storey Prediction". Vector images for different reception heights of 1.5 and 4.5 meters.
"LTE: Coverage by Signal Level (DL) 0 (1.50 m)", "LTE: Coverage by Signal Level (DL) 0 (4.50 m)". Such an image, as on page 8 of the application that Mahdi provided, does not work. Maybe someone has ideas how to do this?
https://cloud.mail.ru/public/6Xa5/uHYGUg354
Bookmarks