Thanks Thanks:  2
Showing results 1 to 3 of 3

Thread: Maximum Number of LTE

  1. #1
    Member Reputation: 88
    Join Date
    2010-08-22
    Posts
    63


    Default Maximum Number of LTE

    Hello Guys,
    Whta's the maximum number of LTE/VoLTE subscribers in terms of RRC Connected, No of bearers, No of RAB, Throughput, RB, RE, bandwidth etc.?
    Thanks a lot, S

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 493
    Join Date
    2010-05-10
    Posts
    301


    Default Re: Maximum Number of LTE

    The signal quality matters a lot. Therefore the microcell should cater to a higher no compared to a macrocell. The CQI value reported will play an important role. VoLTE users an vary from 125 (CQI = 1).to 2000(CQI = 15). But then do not expect all users to report CQI = 15

    Please have a look at this article: http://www.techplayon.com/2286-2/

  4. Thanks zeuscane, SRRFWIRELESS7 thanked for this post
  5. #3
    Member Reputation: 186
    Join Date
    2010-05-07
    Posts
    247


    Default Re: Maximum Number of LTE

    VoLTE user consum:
    - 1 RRC (But shared with data)
    -1 default bearer to setup signalling for SIP
    - 1 dedicated bearer for voice transference
    - Thput should be very slow as the number of RB

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •