Thanks Thanks:  0
Showing results 1 to 3 of 3

Thread: PMKN4025A, MTP850 and tetra cps+

  1. #1
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default PMKN4025A, MTP850 and tetra cps+

    Hi,
    I feel stupid. I've been using Tetra CPS+ 7.3 for a while with great success using an USB-cable.
    I received an extra PMKN4025A (without the flash-switch).
    It is recognized by the radio and works as a data cable.

    But, I cannot for my life get CPS to detect it (Detect RS-232 -radio). Is it even possible?
    Or does it need that one pin tied to the ground when pressing 1+9+pwr to be detected?

    If I put the radio into programming mode with the USB-cable, I can detect it with the RS232-cable.

    Am I just doing something that isn't even possible?
    Last edited by Shuttleman; 2018-08-12 at 03:00 AM Reason: Typo -> PMNK -> PMKN

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 35 AnRegs's Avatar
    Join Date
    2012-11-19
    Posts
    160


    Default Re: PMNK4025A, MTP850 and tetra cps+

    There is no PMNK4025A at all, it doesn't exist.

  4. #3
    Junior Member Reputation: 12
    Join Date
    2018-01-10
    Posts
    53


    Default Re: PMNK4025A, MTP850 and tetra cps+

    Quote Originally Posted by AnRegs View Post
    There is no PMNK4025A at all, it doesn't exist.
    Thanks! my bad, PMKN4025A is what I meant.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •