how to restore a bricked mtp700

[elkan]

Hi All,

I need some advise and help.

I have a ******** MTP700, when i want to make a full new programming from my radio i first want to delete the programming on the radio.

I used CPS 3.1.6 and push the erase button.

After that my radio is dead. No light, no beeps, no reaction to CPS programming software.
CPS doesn't find the radio when i like to program.

I used the original ******** serial cable and programming stand.

after looking on internet i found on ebay a seller how sold Depot CPS MR5.11 R6D.581.03
this seller say it's possible to restore the radio with that software.
I tink it isn't because mr5.11 doesn't support mtp700 i think.

I also think i need a LAP version of CPS but i can't find the right one.
I hope the LAP version have the option to push the software and codeplug to the radio without conformation is connected.

also there are people how say there is a mtp flasher tool but i don't know.

what i have:

-CPS 3.1.6
-the right z19 file
-backup from old codeplug
-right serial cable + stand for programming
-Windows 7 32bit computer

i hope to get some advise how to restore my bricked radio.

I already wanna thank you for support.

[AnRegs]

Get bootloader file first.

[elkan]

i'm not a expert.

Is there a separate bootfile ?
can i extract it from a working mtp700 ?

[RA1AIE]

Get bootloader file first.

Bootloader for MTP700? It's not a MTP3000

[RA1AIE]

i'm not a expert.

Is there a separate bootfile ?
can i extract it from a working mtp700 ?

Look here: http://www.finetopix.com/showthread....oftware-erased
But, if you erased the codeplug and you do not have a saved copy of it - then you need Depot to overwrite the codeplug (or fullflash, doesn't matter) from another radio. And please note that your radio might require realignment in this case.
Some of MR5.11 Depot versions have the MTP700 support.

[elkan]

I have a backup from the codeplug
it's a old backup, but better then no backup i guess.

I made pin 1 and 13 mod.

Now what do i have to do ?

Load my codeplug in my cps 3.1.6 ?
and write ?

or do i need mr5.11 which support mtp700 ?
and if i need, can someone PM me

[RA1AIE]

If you have a backup codeplug - then just write the software, then write codeplug and you're done.

[-bup-]

Hi,

This solution has already been answered to the OP at another forum

[elkan]

RA1AIE is a great member
The radio is accessible for program bij the pin trick.
Now i have to fix the software and codeplug.
Maybe after that i will look for update my radio.

[elkan]

People i will let you know my radio is working again.

I will thank everybody for great help and support !