UL Interference / RTWP Simulation KML

[electron]

based on my understanding with electron
it has been done with below function in Mapinfo

but it has never gave me good output
If any one know how to use, kindly share practical example with us

2018-03-07_22-07-30.jpg

Hi It works very well . send me your tab file and mapinfo workspace to take a look


B
R

[tharinduwije]

2018-03-07_22-07-30.jpg

Hi It works very well . send me your tab file and mapinfo workspace to take a look


B
R

Wow this one is awesome, @electron if you have time can you just put some screencaps in a word & share? would love to test it out.

[BlackX]

i write a simple PPT to show how to set grid

or if your data is many point with long /lat

you can try following procedure to translate all point into polygon and using thematic map to express


1. create point


2. open mapbsic window : In [option] sheet


3. type update ABC set obj=MBR(buffer(obj,12,XX,"m") )


## XX= half value of min distance between two point
## ABC = tab file name

[justdream]

i write a simple PPT to show how to set grid

or if your data is many point with long /lat

you can try following procedure to translate all point into polygon and using thematic map to express


1. create point


2. open mapbsic window : In [option] sheet


3. type update ABC set obj=MBR(buffer(obj,12,XX,"m") )


## XX= half value of min distance between two point
## ABC = tab file name

Hi Friend,
I follow your PPT the result is better but still one problem
I couldn't see interference RTWP values on the MAP
I guess it's because inflection values didn't update with me legend ranges as shown below [Any suggestions?]

[BlackX]

I couldn't see interference RTWP values on the MAP
=> you mean you want to see the value when your point somewhere? If yes , the grid thematic should not support this, it only have color

[justdream]

I couldn't see interference RTWP values on the MAP
=> you mean you want to see the value when your point somewhere? If yes , the grid thematic should not support this, it only have color

no my friend,
I mean my table contains RTWP values of -87.7 and should be displayed in Red based on my configured legend
but Grid Map keep displaying only Blue colors

[BlackX]

BC your max value is -99.89, see the yellow mark, so you need to modify the range

but you say you have RTWP values of -87.7 in your table, i guess the boundary may be wrong. check it

[samuraial]

What kind of data do we input here?
I mean what counters do you use as input as so far I haven't seen any counters having lat/long in them.

B/R

[justdream]

What kind of data do we input here?
I mean what counters do you use as input as so far I haven't seen any counters having lat/long in them.

B/R

We are using RTWP counter
and we have Lat/ Long for each cell

[samuraial]

Name of the counter or share a template if you can.

B/R