CELL IDENTITY IN MOCN CASES-LTE SIB 1

[rimeka]

Looking from the attach signaling flow, selectedPLMN-identity is sent by Ue on message RRCConnectionSetupComplete.
Ue may choose not only the first PLMN. I have tested before that Ue can attach to PLMN on the second list depend on the imsi number.



RRCConnectionSetupComplete-r8-IEs ::= SEQUENCE {
selectedPLMN-Identity INTEGER (1..maxPLMN-r11),
registeredMME RegisteredMME OPTIONAL,
dedicatedInfoNAS DedicatedInfoNAS,
nonCriticalExtension RRCConnectionSetupComplete-v8a0-IEs OPTIONAL
}

[eta004]

Yes correct, but the cellidentity displayed in SIB1 is of first plmn id